Nickel — A Complete Market Guide (2026)

Nickel Base Metals Guide Commodity Guide
Nickel — A Complete Market Guide (2026) Nickel — A Complete Market Guide (2026)

Data as of 10 October 2026. Nickel market structure is shown for full-year 2025, the latest complete year, from the USGS Mineral Commodity Summaries 2026 (and its earlier editions for the history), the International Nickel Study Group’s April 2026 statistics, the IEA Global Critical Minerals Outlook 2026, UN Comtrade and the producers’ latest annual reports.

Nickel is the metal that makes stainless steel stainless — and the energy-dense heart of the nickel-rich batteries in long-range electric vehicles. No major metal market has been remade as fast: in ten years Indonesia went from a minor miner to two-thirds of the world’s mined nickel, a Chinese-built processing industry rewrote the cost curve, and the London nickel market broke so badly in March 2022 that trading was disrupted for about two weeks. The price has paid for it — the LME cash price averaged $25,834 a tonne in 2022 and $15,162 in 2025. This report is the free, big-picture primer on how the nickel market works: where nickel comes from, who processes and buys it, how its price is set, and what drives the cycle. For the company-level data behind the story — every producer screened by production, resources and cost — go to Metal Pilot’s nickel mining stock screener.

TL;DR & Key Takeaways

  • What it is: a hard, corrosion-resistant industrial metal whose main job is alloying. Stainless steel took about 65% of primary nickel in 2023 and batteries about 16%. Like copper, nickel is consumed in use, so the nickel market runs on industrial flow, not on a hoard.
  • Who supplies it: mines produced about 3.9 Mt of nickel in 2025. Indonesia mined 67%, the Philippines 7% and Russia 5%. Processing is concentrated too: Indonesia and China refined 76% of the world’s nickel in 2025, most of it as nickel pig iron for stainless steel.
  • Who uses it: China used 63% of the world’s primary nickel in 2023 and Asia 86%. Demand grew about 6.7% a year over the decade — 3.60 Mt in 2025, against 1.88 Mt in 2015 — with batteries the fast-growing second pillar, slowed by nickel-free LFP cells.
  • The balance: a supply flood. The International Nickel Study Group counts surpluses in every year from 2022 to 2025, 283 kt in 2025 alone, and LME stocks rose to 255 kt by the end of 2025. For 2026 it forecasts a small deficit as Indonesia cuts its mining quota.
  • The price regime: pro-cyclical, dollar-priced and the most volatile of the six LME base metals: from a $52,179 monthly average in May 2007 to $8,299 in February 2016, a squeeze in 2022, and a 41% fall in the annual average from 2022 to 2025.
  • The swing factor: Indonesian policy — mining quotas, ore floor prices, export rules — which now moves supply the way OPEC decisions move oil.

Figure 1. Nickel at a glance, 2025

3.9 Mt
Mine production, 2025e
$58.8 bn
Market size, 2025
$15,162/t
LME cash price, 2025 average
67%
Indonesia's share of mine output
63%
China's share of primary use, 2023
65%
Stainless steel's share of first use
23%
Stainless scrap's share of nickel units
36 yrs
Reserve life

Notes to Figure 1

  1. Mine production — Table 10 · Filed | USGS MCS 2026 | World Mine Production and Reserves | “World total (rounded)" 3,900,000, 2025e | p.133. The IEA counts 4,207 kt of mined output for 2025 (Table 21 notes); the two counts are kept apart.
  2. Market size — Derived | INSG world primary production 3,880 kt (Table 13) × $15,162/t (Table 3, 2025 average) = $58.8 bn; the value of one year’s primary output at the LME price, not of any company.
  3. LME cash price, 2025 average — Table 3 · Market | World Bank | “Nickel”, annual, $/mt | 2025. The latest full-year (twelve-month) average; the trailing twelve months to September 2026 are in the aside under Figure 3.
  4. Indonesia’s share of mine output — Table 10 · Derived | “Indonesia” 2,600,000 ÷ “World total (rounded)" 3,900,000, 2025e | USGS MCS 2026 | p.133 = 66.7%.
  5. China’s share of primary use — Table 8 · Filed | INSG World Nickel Factbook 2024 | Primary Nickel Usage is Highly Concentrated | “topped 63% in 2023” | p.29.
  6. Stainless steel’s share of first use — Table 6 · Filed | INSG World Nickel Factbook 2024 | Nickel Usage | “65% of all primary nickel usage” (2023) | p.26.
  7. Stainless scrap’s share of nickel units — Table 16 · Derived | nickel in stainless-steel scrap 972 kt ÷ (972 kt + primary usage 3,193 kt), 2023 = 23.3%; INSG World Nickel Factbook 2024, p.26, and INSG’s September 2024 press release (the Factbook’s vintage; on the April 2026 revision of 2023 use, 3,265 kt, the share is 22.9%). Other nickel scrap is not counted, so the share is a floor.
  8. Reserve life — Table 12 · Derived | world reserves >140,000 kt ÷ 2025e mine production 3,900 kt = 36 years, a floor because reserves are printed as “more than”.

Figure data: Tables 3, 6, 8, 10, 12, 13 and 16 — USGS Mineral Commodity Summaries 2026: Nickel (page numbers are those of the full volume), the INSG World Nickel Factbook 2024 and April 2026 press release, and the World Bank Pink Sheet; each tile’s citation is in the notes above.

Why it matters now: nickel sits where electrification, which needs high-purity nickel, meets the most assertive resource policy in the metals world, which has concentrated supply in one archipelago. The result through 2025 was a cheap, oversupplied metal with a growing demand base — and in 2026 the same government began cutting supply to lift the price. For an investor, nickel is a bet on two things at once: the pace of demand and the choices of one capital (Section 4).

How to read this guide: new to nickel? Read straight through from Section 1. Here for the investment case? Jump to Section 4 — how to own it, how to screen the producers, and what drives the cycle. Every technical term is defined in the Terms list at the end.

1. Nickel & the market basics

1.1 What nickel is — physical basics & quality

Nickel (chemical symbol Ni) is a silvery-white metal prized for a combination no other cheap element offers: it resists corrosion, holds its strength at high temperatures and alloys readily with iron. Added to steel with chromium it makes austenitic stainless steel — the 300-series grades of kitchens, chemical plants and LNG tanks — which is why stainless has been nickel’s home market for a century. The same properties put nickel in superalloys for jet-engine turbines, in plating and in alloy steels. Its newest role reverses the logic: in NMC and NCA lithium-ion cathodes (lithium nickel manganese cobalt and nickel cobalt aluminium oxides) nickel stores energy, and more nickel in the cathode means more range per kilogram of battery. Unlike gold, nickel has no monetary role; like its sibling base metal copper, it is an industrial input whose demand tracks the real economy.

Nickel’s quality story starts with two ore families, each defined here once:

  • Magmatic sulfide ores are formed when nickel-rich magma separates a sulfide melt — Norilsk in Siberia, Sudbury in Ontario, Voisey’s Bay in Labrador, the komatiite belts of Western Australia. They are the conventional route: they concentrate by flotation (separating the sulfide minerals in froth), smelt and refine into high-purity metal, and often carry copper, cobalt and platinum-group metals (PGMs) as by-products. The ore reserves of Glencore’s Sudbury and Raglan mines grade 2.02% nickel.
  • Laterite ores are shallow blankets formed by tropical weathering, dominant in Indonesia, the Philippines and New Caledonia. They split into an upper limonite layer (typically 0.8–1.8% nickel, cobalt-bearing) and a deeper saprolite layer (1.5–2.7% nickel). Laterites hold 54% of the world’s nickel resources and are cheap to dig, but energy-hungry to process.

The product side has its own two tiers. Class 1 nickel is refined metal of at least 99.80% purity — cathode, briquettes, pellets, rounds — deliverable on the London Metal Exchange and usable in any application. Class 2 nickel is lower-purity, iron-bearing product: nickel pig iron (NPI), about 12% nickel at Nickel Industries’ plants, and ferronickel, made for one customer, the stainless mill. Between them sit the intermediates — nickel matte, a smelted nickel sulfide, and mixed hydroxide precipitate (MHP), a nickel-cobalt hydroxide — which feed refineries and plants making nickel sulphate, the battery salt (at least 22% nickel). The routes are set by the ore: sulfide → smelter → matte → refinery → class 1 metal; saprolite → RKEF (rotary-kiln electric furnace) → NPI or ferronickel → stainless mill, or → matte → sulphate; and limonite → HPAL (high-pressure acid leaching) → MHP → nickel sulphate → cathode. Since 2021 Indonesian plants have converted part of their NPI into matte, so nickel now moves between the stainless and battery chains to whichever pays more.

Figure 2. The nickel value chain — three ores, three routes

Ore
Process
Product
First use
  • Sulfide ore
  • Saprolite ore
  • Limonite ore
  • Smelter & refinery
  • RKEF furnace
  • HPAL autoclave
  • Class 1 metal
  • NPI & ferronickel
  • Nickel matte
  • MHP
  • Alloys & plating
  • Stainless steel
  • Nickel sulphate

Chart source: this guide’s summary of the processing routes described in the IEA Global Critical Minerals Outlook 2026, Outlook for nickel (RKEF, NPI-to-matte and HPAL routes; laterite grades), pp.149–151, and the USGS Mineral Commodity Summaries 2026: Nickel, World Resources, p.133; conceptual, with no volumes. The highlighted path is the largest by volume: nickel pig iron was about 55% of world primary nickel in 2025 (Table 16).

1.2 Units & measurement conventions

This report uses the base-metals convention throughout. Quantities are metric tonnes (t), thousand tonnes (kt) and million tonnes (Mt) of contained nickel — the nickel inside ore, NPI, matte, MHP or metal — the basis of the USGS, the INSG and the IEA. Prices are US dollars per tonne of class 1 metal on the LME; US data also use dollars per pound (1 t = 2,204.62 lb, so the USGS’s $15,000/t for 2025 is $6.80/lb). Grades are % Ni. Two distinctions recur. Mine production counts nickel in ore (3.9 Mt in 2025); primary production counts the first products made from it — NPI, ferronickel, metal, oxide, sulphate (3.88 Mt) — and primary usage what users take (3.60 Mt). And production and usage are flows per year, while reserves (more than 140 Mt) and exchange inventories are stocks at a point in time.

Table 1. Nickel units and conversions

Unit Meaning Typical magnitude in nickel Conversion
t Ni Metric tonne of contained nickel One LME lot is 6 t 2,204.62 lb
kt Thousand tonnes A large mine or plant: 25–125 kt/yr 1,000 t
Mt Million tonnes World flows (3.9 Mt mined, 2025); reserves (>140 Mt) 1,000 kt
$/t Dollars per tonne of class 1 metal LME cash, 2025 average: $15,162 ÷ 2,204.62 = $/lb
wmt Wet metric tonne of ore Indonesian ore quotas and floor prices ore tonne before drying
% Ni Nickel grade Limonite 0.8–1.8%; saprolite 1.5–2.7%; NPI ~12%; sulphate ≥22%; class 1 ≥99.80% —

Source: USGS, Mineral Commodity Summaries 2026: Nickel, Salient Statistics (“Dollars per metric ton”, “Dollars per pound”), World Mine Production and Reserves, pp.132–133; the LME nickel contract specifications (lot size 6 tonnes; “Nickel of 99.80% purity (minimum)"); the IEA Global Critical Minerals Outlook 2026, laterite grades and the sulphate’s nickel content, p.149; Nickel Industries Annual Report 2025, RKEF operations, “Nickel grade” 11.8% (2025), p.6 of the PDF; the plant size range is Table 5’s. The magnitude column is this guide’s summary.

1.3 Pricing & benchmarks

The world reference price is the LME nickel contract, quoted in US dollars per tonne for class 1 metal of approved brands, in 6-tonne lots. The Shanghai Futures Exchange (SHFE) has traded a parallel contract since March 2015. But most of the world’s nickel never touches an exchange warehouse: NPI, ferronickel, MHP and sulphate trade on negotiated terms, priced off assessments by price-reporting agencies or as payables — a percentage of the LME price paid for the nickel an intermediate contains. The spreads between these prices are the market’s map of which product is scarce: NPI averaged $11,663 per tonne of contained nickel in 2025 on Shanghai Metals Market’s assessment, a 23% discount to the LME. Upstream, Indonesia sets a monthly floor price for ore (HPM), which it revised in April 2026 to add value for cobalt, iron and chromium. Nickel normally trades in mild contango (futures above spot, the cost of storage and finance), flipping to backwardation (futures below spot) when nearby metal is scarce.

Table 2. Key nickel benchmarks & price markers

Benchmark What it prices Pricing point Role
LME nickel Class 1 metal, ≥99.80% Ni, 6 t lots LME-approved warehouses, $/t Global reference; physically settled
SHFE nickel Class 1 metal in China Shanghai, yuan/t Chinese demand signal (since 2015)
NPI (assessed) Nickel pig iron, 8–12% Ni China, per t of contained Ni The stainless feed price; 2025 average $11,663/t
MHP and matte payables Intermediates, % of the LME price Indonesia to China The battery-chain feed price
Nickel sulphate (assessed) Battery-grade salt, ≥22% Ni China The cathode-chain price
HPM ore floor Nickel ore, $/wmt Indonesia, FOB Government floor for domestic ore

Source: LME nickel contract specifications (lot size, purity, “US dollars per tonne”); Eramet Universal Registration Document 2025 (Investors → Annual report → 2025 URD), §1.2.2.2.4 Nickel price — SHFE listing (“Since late March 2015, nickel metal is also listed on the Chinese SHFE”), the NPI assessment — Shanghai Metals Market’s, as Eramet reports it (“NPI price (SMM 8%-12%)", p.68; “with an average of USD” 11,663/t, p.67) — and the HPM formula, p.69; IEA Global Critical Minerals Outlook 2026, the sulphate specification and the April 2026 HPM revision, p.149. The 23% NPI discount is computed here against the 2025 LME average in Table 3. The role column is this guide’s summary.

The long-run price story is the most violent in base metals. Nickel spent the early 2000s below $10,000 a tonne, then rode China’s stainless boom to an annual average of $37,230 in 2007 — the monthly average peaked at $52,179 in May — before falling 43% in 2008. A long bear market followed, interrupted by Indonesia’s 2014 ore-export ban, down to the 2016 annual trough of $9,595. Electrification and post-pandemic stimulus lifted the average to $18,465 in 2021, the March 2022 squeeze pushed that year’s average to $25,834, and then Indonesian supply broke the market: the average fell in each of the next three years to $15,162 in 2025, 41% below 2022. Over the full window the average was $16,210.

Table 3. Average annual nickel price, 2000–2025, LME cash

Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
Price $8,638/t $5,945/t $6,772/t $9,629/t $13,823/t $14,744/t $24,254/t $37,230/t $21,111/t $14,655/t $21,809/t $22,910/t $17,548/t
Year 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Price $15,032/t $16,893/t $11,863/t $9,595/t $10,410/t $13,114/t $13,914/t $13,787/t $18,465/t $25,834/t $21,521/t $16,814/t $15,162/t

Notes to Table 3

  1. The USGS prints the same LME cash averages to within 0.3% for 2015–2024 (“Price, average annual, London Metal Exchange (LME), cash” in the MCS 2022–2026 editions; “Price, average annual, London Metal Exchange (LME):" with “Cash, dollars per metric ton” in 2017–2021) and estimates 2025 at $15,000.
  2. The 2022 average is lifted by the March 2022 squeeze, when the monthly average reached $33,924 (Section 4.4).

Source: World Bank, Commodity Price Data (Pink Sheet), annual, sheet “Annual Prices (Nominal)", column “Nickel” ($/mt), 2000–2025; the World Bank’s nickel series is the LME cash price. Calendar-year averages of monthly values, rounded to the dollar; the monthly averages in the text and notes are from the monthly file, sheet “Monthly Prices”, column “Nickel”. The multi-year average is computed here.

Figure 3. Nickel’s boom, bust and squeeze, 2000–2025 ($/t)

Nickel price ($/t)
40,000
30,000
20,000
10,000
0
LME cash price 15,162
2000
2005
2010
2015
2020
2025

Figure data: Table 3. A line rather than columns, because 26 years are more than a column chart can print; every value is in the table.

For reference — 2026 so far (an aside, not a headline). The LME cash price averaged $17,344 a tonne in January–September 2026 and $16,729 over the twelve months to September 2026 (World Bank monthly series). The IEA attributes a 20% rise from December 2025 to mid-2026 to Indonesian announcements cutting 2026 mining quotas (IEA Global Critical Minerals Outlook 2026, p.149). The year is not complete, and the guide’s analysis rests on the full-year series above.

2. Supply, demand & the market balance

2.1 Where nickel is mined — deposits & geology

Nickel supply used to be a tale of a few great sulfide districts: the Norilsk-Talnakh intrusions in Siberia, the Sudbury basin in Ontario, Voisey’s Bay in Labrador and the komatiite belts of Western Australia. They still hold the highest grades, the valuable by-products and much of the world’s class 1 refining. But the modern story is laterite — the weathered blankets of Sulawesi and Halmahera in Indonesia, Mindanao and Palawan in the Philippines, and New Caledonia — long thought second-rate, until Chinese-built RKEF furnaces and, later, HPAL plants made them the cheapest nickel units in the world. The countries that mine mainly laterite produced about 79% of the world’s mined nickel in 2025.

Table 4. Where nickel is mined: deposit types, 2025

Deposit type Main producing countries Share of world resources Mine output, 2025e Share of world output Main route
Laterite Indonesia, Philippines, New Caledonia, Brazil 54% 3,080 kt Ni 79% RKEF to NPI / ferronickel; HPAL to MHP
Magmatic sulfide Russia, Canada, China, Australia 1, United States 35% 515 kt Ni 13% Smelter to matte to class 1 metal
Other countries 2 Colombia, Cuba and others — 290 kt Ni 7% Mostly laterite
Hydrothermal, seafloor crusts and nodules Not mined 10% — — —
Tailings and other — 1% — — —
World — 100% 3,900 kt Ni 100% —

Notes to Table 4

  1. Australia mines both: its sulfide mines in Western Australia and the Murrin Murrin laterite (Table 5). Each country is placed under its dominant type.
  2. The USGS’s “Other countries” row; Cerro Matoso (Colombia) and Moa (Cuba) are laterite operations (Table 5).

Source: USGS, Mineral Commodity Summaries 2026: Nickel, World Mine Production and Reserves, column “Mine production” 2025e, the country rows summed here by deposit type, and World Resources (“54% in laterites and 35% in magmatic sulfide deposits”; hydrothermal and seafloor 10%; tailings 1%), p.133 of the full volume; shares computed here against “World total (rounded)" 3,900,000. The deposit-type and route columns are this guide’s geological summary.

The asset base is concentrated too. Weda Bay on Halmahera — owned by Tsingshan (57%) and France’s Eramet (43%) through their joint venture — is, in Eramet’s words, the world’s largest nickel mine: it produced 41.9 Mt of marketable ore, wet in 2025 and sold 38.5 Mt, though no owner prints the nickel it contained. Most Indonesian supply runs through two Tsingshan-anchored industrial parks, Morowali (IMIP) on Sulawesi and Weda Bay (IWIP) on Halmahera, where RKEF lines and HPAL plants cluster around captive coal power. The twelve operations in Table 5 that print their output made about 590 kt of nickel in their latest year — about 15% of world primary supply.

Table 5. Major nickel operations, latest fiscal year

Operation Country Operator and owners Route Output, as reported Source
Nickel Industries RKEF lines (Hengjaya, Ranger, Oracle, Angel) Indonesia (IMIP, IWIP) Nickel Industries 80% 1 Saprolite to RKEF to NPI 125.0 kt Ni, Ni in NPI, 2025 Filed | NIC AR 2025 | Review of Operations, RKEF operations | “Total nickel production” | p.6
Huayue HPAL (HNC) Indonesia (IMIP) Huayou-led venture; Nickel Industries 10% Limonite to HPAL to MHP 85.0 kt Ni, Ni in MHP, 2025 Filed | NIC AR 2025 | HPAL operations | “Huayue Nickel Cobalt (HNC) Project produced” | p.8
Sorowako Indonesia (Sulawesi) PT Vale Indonesia (MIND ID 34.0%, Vale 33.9%, Sumitomo 11.5%) Saprolite to RKEF to matte 72.0 kt Ni, Ni in matte, 2025 Filed | INCO AR 2025 | Operational performance | “nickel in matte production in 2025 reached” 2
Integrated Nickel Operations (Sudbury, Raglan, Nikkelverk) Canada, Norway Glencore 100% Sulfide to matte to class 1 39.8 kt Ni, own-sourced metal, 2025 Filed | Glencore AR 2025 | Production from own sources – Nickel assets | “Integrated Nickel Operations (INO)"
Barro Alto and Codemin Brazil Anglo American 100% (sale to MMG agreed) Saprolite to ferronickel 39.7 kt Ni, Ni in ferronickel, 2025 Filed | Anglo American IAR 2025 | Discontinued operations – Nickel | “Production volume (t)"
Cerro Matoso Colombia South32 99.9% (sale agreed) Laterite to ferronickel 37.1 kt Ni, payable Ni, FY to Jun 2025 Filed | South32 AR 2025 | Cerro Matoso | “Payable nickel production (kt)"
Weda Bay Indonesia (IWIP) PT Weda Bay Nickel: Tsingshan–Eramet venture 90% 3 Ore to IWIP plants; own NPI plant NPI plant 35.8, Ni content; ore 41.9 Mwmt, 2025 Filed | Eramet URD 2025 | Operational metrics | “Production of low-grade nickel ferroalloys”
Sudbury Canada Vale Base Metals Sulfide to class 1 35.3 kt Ni, finished Ni by ore source, 2025 Filed | Vale 20-F 2025 | Item 4, Production | “Sudbury Open pit/Underground” | p.64
Voisey’s Bay to Long Harbour Canada Vale Base Metals Sulfide to hydromet refinery 33.1 kt Ni, finished Ni, 2025 Filed | Vale 20-F 2025 | Item 4, Production | “Voisey’s Bay” | p.64
Murrin Murrin Australia Glencore 100% Limonite to HPAL to class 1 32.1 kt Ni, own-sourced metal, 2025 Filed | Glencore AR 2025 | Production from own sources – Nickel assets | “Murrin Murrin”
Onça Puma Brazil Vale Base Metals Saprolite to ferronickel 26.1 kt Ni, finished Ni, 2025 Filed | Vale 20-F 2025 | Item 4, Production | “Onça Puma Open pit” | p.64
Moa joint venture Cuba, Canada Sherritt 50%, General Nickel Company 50% Limonite to HPAL to class 1 25.2 kt Ni, finished Ni, 2025 Filed | Sherritt AIF 2025 | 2025 production results | “finished nickel production was”
Obi Island (RKEF and HPAL) Indonesia Harita Nickel Saprolite to ferronickel; limonite to MHP, sulphate 126.3 kt Ni + 102.1, Ni sold, FY2024 4 Filed | NCKL AR 2024 | Operational performance | “total sales volume of FeNi reached”; “total sales of nickel content reached”

Notes to Table 5

  1. 100% of the RKEF projects, in which Nickel Industries holds an 80% indirect interest (“RKEF OPERATIONS (80% indirect interest held by Nickel Industries)"); 1,055,658 t of NPI at 11.8% nickel.
  2. Vale’s 20-F counts 54.7 kt from Sorowako ore as finished nickel at its own refineries — a different measure; the two are not added.
  3. Strand Minerals, owned 43% by Eramet and 57% by Tsingshan, holds 90% of PT Weda Bay Nickel; Eramet’s indirect interest is 38.7%. The ore is wet tonnes at 100%; its nickel content is not printed, so the mine’s share of world supply cannot be computed.
  4. Harita’s 2025 annual report could not be retrieved; the row is 2024 sales of nickel in ferronickel (126.3 kt) and in MHP and sulphate (102.1 kt), not production, and is left out of the 590 kt total and of Figure 4.

Source: the operators’ latest annual reports, row by row as cited — Nickel Industries Annual Report 2025 (pages of the PDF), PT Vale Indonesia Annual Report 2025 (IDX → Listed companies → INCO → Annual report), Glencore Annual Report 2025, Anglo American Integrated Annual Report 2025 (Annual reporting → 2025), South32 Annual Report 2025 (2025 Annual Reporting Suite → Annual Report 2025), Eramet Universal Registration Document 2025, Vale 2025 Form 20-F, Sherritt Annual Information Form 2025 and Harita Nickel’s Annual Report 2024 (IDX → Listed companies → NCKL → Annual report). Output is 100% of the operation, as each owner reports it — nickel in product or, for Vale, finished nickel by ore source; the bases differ and the column is not additive across rows. The 590 kt total is summed here over the first twelve rows. Ownership is from the same reports. The Weda Bay description (“now the world’s largest nickel mine”) and its ownership are Eramet’s.

Figure 4. Twelve large nickel operations, latest year (kt Ni)

Nickel Industries RKEF lines
Huayue HPAL (HNC)
Sorowako
Glencore INO
Barro Alto + Codemin
Cerro Matoso
Weda Bay NPI plant
Sudbury
Voisey's Bay
Murrin Murrin
Onça Puma
Moa JV
125.0
85.0
72.0
39.8
39.7
37.1
35.8
35.3
33.1
32.1
26.1
25.2
2025 output (kt Ni, contained; bases differ — see Table 5)

Figure data: Table 5, rows 1–12, on each owner’s basis; Harita’s 2024 sales are left out because they are not production.

2.2 Demand & consumption

Nickel demand is a stainless-steel story with a battery kicker. Stainless steel took about 65% of primary nickel in 2023 and batteries about 16%; the rest goes into non-ferrous and high alloys (jet engines, energy), plating, alloy steels and castings. The battery share is the moving part: the IEA counts nickel use in electric-vehicle batteries nearly doubling from 222 kt in 2021 to 439 kt in 2025, while other uses grew 15%. Two forces keep that growth honest. LFP (lithium iron phosphate) cathodes contain no nickel, and LFP battery packs were more than 40% cheaper per kWh than NMC packs in 2025, so every point of LFP share is nickel demand that never happens (the battery-chemistry story is lithium’s as much as nickel’s). And the INSG notes that demand for plug-in hybrids outpaced demand for fully electric cars.

Table 6. Primary nickel use by sector, 2023

Sector Share of primary use What it is
Stainless steel ~65% Austenitic 300-series and other nickel-bearing grades
Other uses 1 ~19% Non-ferrous and high alloys, plating, alloy steel and castings, chemicals
Batteries ~16% Nickel sulphate for NMC and NCA cathode precursors

Notes to Table 6

  1. The INSG prints the stainless and battery shares in its text; the split of the remainder appears only in an unlabelled chart, so it is shown here as one residual (100% − 65% − 16%).

Source: INSG, World Nickel Factbook 2024, Nickel Usage — “65% of all primary nickel usage” and “The battery industry accounted for 16%", p.26; “Estimated Usage Distribution of Primary Nickel by Sector 2023”, p.32. The residual is computed here; the description column is this guide’s summary.

Figure 5. Primary nickel use by sector, 2023

65%
19%
16%
Stainless steel Other uses Batteries
% of primary nickel use, 2023

Figure data: Table 6.

Table 7. Nickel demand by use, 2021 and 2025, IEA

Use 2021 2025 Change Share, 2025
Other uses (stainless, alloys, plating) 2,536 kt Ni 2,906 kt Ni +15% 82.3%
Electric vehicles 222 kt Ni 439 kt Ni +98% 12.4%
Other clean energy 1 77 kt Ni 159 kt Ni +106% 4.5%
Battery storage 9 kt Ni 28 kt Ni +211% 0.8%
Total demand 2,845 kt Ni 3,532 kt Ni +24% 100%

Notes to Table 7

  1. Nickel used in renewables and hydrogen technologies.
  2. The IEA’s batteries (electric vehicles plus storage, 13.2% in 2025) and the INSG’s batteries (16% in 2023, Table 6) are defined differently and are not compared.

Source: IEA, Global Critical Minerals Outlook 2026, Annex, “Nickel demand”, rows “Electric vehicles”, “Battery storage”, “Other” (under clean energy), “Other uses”, “Total demand”, Historical 2021 and 2025, p.353. Changes and shares are computed here. The LFP price gap is the IEA’s (p.71); the plug-in hybrid observation is the INSG’s April 2026 press release.

Geographically, nickel is the most Asia-centred of the major metals. Asia used 86% of the world’s primary nickel in 2023, up from 40% in 2001, and China alone more than 63%, the share of the world’s dominant stainless and battery-precursor industry. Indonesia roughly doubled its use from 2019 to 2023 as Tsingshan-built stainless mills started melting the country’s own NPI. Europe’s share fell from 42% to 9% over the same two decades as its stainless industry shrank. No agency publishes nickel use for every country, so Table 8 gives the INSG’s continental shares with the two countries that do have public figures.

Table 8. Primary nickel use by region, 2023

Region Share of world use Use, approximate Countries with a published figure
Asia 86% ~2,746 kt Ni China, more than 63% (≥2,012 kt); Indonesia roughly doubled its use from 2019
Europe 9% ~287 kt Ni —
Americas 5% ~160 kt Ni United States: 107 kt of reported primary use (3.4% of the world)
Africa and Oceania <1% — —
World 100% ~3,193 kt Ni —

Source: INSG, World Nickel Factbook 2024, “Primary Nickel Usage Proportion” (Asia 86%, Europe 9%, Americas 5%), p.31, and “Primary Nickel Usage is Highly Concentrated” (“topped 63% in 2023”; Indonesia “roughly doubled its usage”), p.29; world use 3,193 kt from the INSG’s September 2024 press release (the Factbook’s vintage; the April 2026 release revises 2023 to 3,265 kt); United States from USGS MCS 2026, Salient Statistics, “Reported, primary” 107,000 (2023), p.132. The tonnages are computed here as share × world use. The INSG publishes continents, not the seven-region set this blog normally uses; China is named because it is two-thirds of the total.

Figure 6. Nickel use moves to Asia, 2001–2023 (% of world primary use)

40%
42%
18%
2001
49%
35%
16%
2006
65%
23%
12%
2011
73%
17%
10%
2016
86%
9%
5%
2023
Asia Europe Americas & other
% of world primary nickel use

Chart source: INSG, World Nickel Factbook 2024, “Primary Nickel Usage Breakdown by Region”, p.28 — the shares are printed as chart labels and read from them; Africa (1–3%) is combined with the Americas, and the 2023 chart labels neither Africa nor Oceania (each below 1%).

Table 9. World primary nickel usage, 2015–2025

Year 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Usage 1,882 kt Ni 2,033 kt Ni 2,184 kt Ni 2,328 kt Ni 2,405 kt Ni 2,390 kt Ni 2,779 kt Ni 2,963 kt Ni 3,265 kt Ni 3,473 kt Ni 3,596 kt Ni
Change — +8.0% +7.4% +6.6% +3.3% −0.6% +16.3% +6.6% +10.2% +6.4% +3.5%

Source: INSG press releases, each year at its latest revision — 2015 from April 2017, 2016 from April 2018, 2017 from October 2018, 2018 from October 2019, 2019 from April 2021, 2020 from April 2022, 2021 from April 2023, 2022 from April 2024 and 2023–2025 from April 2026, sentence “World primary nickel usage was”. Changes are computed here; because the years come from different releases, a change can include a revision (2023’s +10.2% includes the April 2026 revision of 2023 from 3,190 kt to 3,265 kt).

Over the decade, primary usage grew about 6.7% a year, from 1.88 Mt to 3.60 Mt, with only one down year (2020). The full production series and the balance are in Section 2.4.

2.3 Supply: producing countries

Mine supply is now one country and a long tail. Indonesia mined an estimated 2.6 Mt in 2025, 67% of the world’s 3.9 Mt, up 13% in a year as new operations ramped up. The Philippines, the old raw-ore supplier to China, fell 24% to 270 kt after mines cut production. The legacy sulfide producers — Russia and Canada — are single-digit contributors, and Australia, home of the twentieth century’s great sulfide industry, produced 54% less in 2025 as low prices pushed mines into care and maintenance, including BHP’s Nickel West (Section 3.1). New Caledonia recovered after its 2024 unrest.

Table 10. Leading nickel-mining countries, 2024–2025

Country 2024 2025e Change Share of world, 2025 Trend 1
Indonesia 2,310 kt Ni 2,600 kt Ni +12.6% 66.7% Rising; quota cut in 2026
Philippines 354 kt Ni 270 kt Ni −23.7% 6.9% Falling; ore exports to Indonesia
Russia 205 kt Ni 200 kt Ni −2.4% 5.1% Flat
Canada 125 kt Ni 140 kt Ni +12.0% 3.6% Mine expansion completed
New Caledonia 116 kt Ni 140 kt Ni +20.7% 3.6% Recovering from 2024 unrest
China 115 kt Ni 120 kt Ni +4.3% 3.1% Flat
Brazil 67.5 kt Ni 70 kt Ni +3.7% 1.8% Flat
Australia 98 kt Ni 45 kt Ni −54.1% 1.2% Mines in care and maintenance
United States 7.5 kt Ni 10 kt Ni +33.5% 0.3% One mine (Eagle)
Other countries 308 kt Ni 290 kt Ni −5.8% 7.4% —
World 3,710 kt Ni 3,900 kt Ni +5.1% 100% —

Notes to Table 10

  1. The trend column is this guide’s reading of the USGS commentary (“Production in Indonesia increased by an estimated 13%"; Canada “after a company completed a mine expansion”; Australia “multiple companies placed mines into care-and-maintenance status”) and, for Indonesia’s 2026 quota and Philippine ore exports, the IEA (Table 20).
  2. The USGS revised Canada’s 2024 output significantly on a government report.

Source: USGS, Mineral Commodity Summaries 2026: Nickel, World Mine Production and Reserves, column “Mine production” 2024 and 2025e, and Events, Trends, and Issues, p.133 of the full volume. Changes and shares are computed here from the unrounded tonnes. The Eagle mine is the USGS’s (Domestic Production and Use, p.132).

Figure 7. Leading nickel-mining countries, 2025 (kt Ni)

Indonesia
Philippines
Russia
Canada
New Caledonia
China
Brazil
Australia
United States
Rest of world
2,600
270
200
140
140
120
70
45
10
290
Mine production, 2025e (kt Ni, contained)

Figure data: Table 10.

Indonesia’s rise is the decade’s story, and it was policy-made. The 2014 ban on exporting direct-shipping ore forced Chinese and Indonesian groups to build smelters in Indonesia instead; the ban was eased in 2017 for companies building processing plants and reinstated in January 2020, two years earlier than announced. Indonesia’s mine output went from 130 kt in 2015 to 2.6 Mt in 2025 — a twentyfold rise — and passed the rest of the world outside the Philippines in 2022, while that rest of the world fell by more than a third.

Table 11. Nickel mine production, 2015–2025

Series 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025e
World 2,280 kt Ni 2,090 kt Ni 2,160 kt Ni 2,400 kt Ni 2,610 kt Ni 2,510 kt Ni 2,730 kt Ni 3,270 kt Ni 3,750 kt Ni 3,710 kt Ni 3,900 kt Ni
Indonesia 130 kt Ni 199 kt Ni 345 kt Ni 606 kt Ni 853 kt Ni 771 kt Ni 1,040 kt Ni 1,580 kt Ni 2,030 kt Ni 2,310 kt Ni 2,600 kt Ni
Philippines 554 kt Ni 347 kt Ni 366 kt Ni 345 kt Ni 323 kt Ni 334 kt Ni 387 kt Ni 345 kt Ni 413 kt Ni 354 kt Ni 270 kt Ni
Rest of world 1,596 kt Ni 1,544 kt Ni 1,449 kt Ni 1,449 kt Ni 1,434 kt Ni 1,405 kt Ni 1,303 kt Ni 1,345 kt Ni 1,307 kt Ni 1,046 kt Ni 1,030 kt Ni
Indonesia’s share 5.7% 9.5% 16.0% 25.2% 32.7% 30.7% 38.1% 48.3% 54.1% 62.3% 66.7%

Source: USGS, Mineral Commodity Summaries: Nickel, each year at its latest revision — 2015 from the 2017 edition, 2016 from 2018, 2017 from 2019, 2018 from 2020, 2019 from 2021, 2020 from 2022, 2021 from 2023, 2022 from 2024, 2023 from 2025 and 2024–2025 from 2026. Series key: World = “World total (rounded)"; Indonesia and Philippines = their rows; Rest of world = World less the two, computed here; the share is computed here. Each edition’s World Mine Production and Reserves table, column “Mine production”. Some country values are USGS estimates, and a change between two years can include a revision (the Philippines’ 2016 fall mixes a revision of the 2016 estimate from 500 kt to 347 kt).

Figure 8. Indonesia overtakes the world, 2015–2025 (kt Ni)

Mine production (kt Ni)
3,000
2,500
2,000
1,500
1,000
500
0
Indonesia 2,600 Rest of world 1,030 Philippines 270
2015
2017
2019
2021
2023
2025

Figure data: Table 11.

Reserves tell the same southern story. Indonesia holds 62 Mt of the world’s more than 140 Mt, followed by Australia (25 Mt, of which 11 Mt meets the JORC standard) and Brazil (16 Mt). At 2025’s mine output, world reserves last about 36 years, and identified resources are much larger — more than 350 Mt. Nickel is not geologically scarce; cheap nickel outside Indonesia is.

Table 12. Nickel reserves by country and reserve life

Country Reserves Reserve life at 2025e output
Indonesia 62 Mt Ni 24 yrs
Australia 1 25 Mt Ni 556 yrs
Brazil 16 Mt Ni 229 yrs
Russia 8.3 Mt Ni 42 yrs
New Caledonia 7.1 Mt Ni 51 yrs
Philippines 4.8 Mt Ni 18 yrs
China 4.4 Mt Ni 37 yrs
Canada 2.2 Mt Ni 16 yrs
United States 0.34 Mt Ni 34 yrs
Other countries >9.1 —
World >140 Mt Ni ~36 yrs (floor)

Notes to Table 12

  1. Of Australia’s 25 Mt, the USGS counts 11 Mt as JORC-compliant or equivalent; even that would last about 244 years at 2025’s collapsed output of 45 kt, so the long life is mostly an output effect.

Source: USGS, Mineral Commodity Summaries 2026: Nickel, World Mine Production and Reserves, column “Reserves” and footnote 9 (“Joint Ore Reserves Committee-compliant or equivalent reserves were 11 million tons”), and World Resources (“more than 350 million tons of nickel”), p.133 of the full volume. Reserve life is computed here as reserves ÷ 2025e mine production (Table 10). Reserves are estimates on national reporting bases.

2.4 The supply–demand balance

Nickel is consumed, so its balance behaves like an industrial commodity’s: surpluses build inventories and press on the price, deficits drain them. And supply arrives in large, lumpy Indonesian increments while demand grinds upward, so the swings are big. On the INSG’s count the market ran a small surplus in 2015, deficits from 2016 to 2019 — 144 kt in 2018 — as stainless and early battery demand outran supply, a surplus in the pandemic year and a 169 kt deficit in 2021. Then the Indonesian build-out arrived: four straight surpluses, from 98 kt in 2022 to 283 kt in 2025, the largest in the series. For 2026 the INSG forecasts production falling to 3.72 Mt against usage of 3.75 Mt — a 32 kt deficit, the first since 2021, resting on Indonesia’s lower mining quota. It is a forecast, and the INSG flags its uncertainty over Indonesian output.

Table 13. World primary nickel production, usage and balance, 2015–2026f

Year 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026f
Production 1,976 kt Ni 1,989 kt Ni 2,070 kt Ni 2,184 kt Ni 2,369 kt Ni 2,490 kt Ni 2,610 kt Ni 3,060 kt Ni 3,439 kt Ni 3,589 kt Ni 3,880 kt Ni 3,715 kt Ni
Usage 1,882 kt Ni 2,033 kt Ni 2,184 kt Ni 2,328 kt Ni 2,405 kt Ni 2,390 kt Ni 2,779 kt Ni 2,963 kt Ni 3,265 kt Ni 3,473 kt Ni 3,596 kt Ni 3,747 kt Ni
Balance +94 kt Ni −44 kt Ni −114 kt Ni −144 kt Ni −36 kt Ni +99 kt Ni −169 kt Ni +98 kt Ni +175 kt Ni +116 kt Ni +283 kt Ni −32 kt Ni

Notes to Table 13

  1. The balance is the INSG’s printed figure where its release prints one (2018–2026), which can differ by 1 kt from production less usage because the INSG computes it unrounded; for 2015–2017 it is computed here.
  2. 2026 is the INSG’s April 2026 forecast; “The estimates do not include an adjustment factor for possible production disruptions”.

Source: INSG press releases, each year at its latest revision as listed under Table 9 (production: “World primary nickel production was”; balance: “The implicit market balances are”), the 2026 forecast from the April 2026 release. The USGS cites earlier INSG vintages of the 2022–2024 surpluses — 98.5, 170 and 182 kt (MCS 2026, Events, Trends, and Issues, p.132); the IEA, on a refined basis, puts the 2025 surplus at 200 kt (Global Critical Minerals Outlook 2026, p.148).

Figure 9. Nickel’s market balance, 2015–2025 (kt Ni)

Balance (kt Ni)
+400
+300
+200
+100
0
−100
−200
+94
−44
−114
−144
−36
+99
−169
+98
+175
+116
+283
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
Year
deficit (−) surplus (+)

Figure data: Table 13, 2015–2025; the 2026 forecast is left out of the chart because it is not a measured year.

The shock absorber is visible inventory. LME warehouses held more than 370 kt in mid-December 2016, at the end of the 2015–16 bust — about nine and a half weeks of world use. The deficit years then drained them. The new surpluses refilled them: LME stocks rose by 93 kt in 2025 to 255 kt at year-end, about 3.7 weeks of world use. Much of the surplus sits outside the exchange, though: in NPI and intermediates the IEA describes as well supplied, with “elevated inventories” of NPI and ferronickel.

Table 14. LME nickel stocks and cover

Date LME stocks World primary usage that year Cover of world use
Mid-December 2016 >370 kt Ni 2,033 kt Ni ~9.5 weeks (floor)
End-December 2024 162 kt Ni 3,473 kt Ni 2.4 weeks
End-December 2025 255 kt Ni 3,596 kt Ni 3.7 weeks

Source: USGS, Mineral Commodity Summaries 2017: Nickel, Events, Trends, and Issues (“By mid-December, stocks in LME warehouses were more than 370,000 tons”), p.115 of the full volume; Eramet Universal Registration Document 2025, §1.2.2.2.4 Nickel price (“inventories in LME warehouses, which reached” 255 kt “at the end of December, an increase of” 93 kt), p.67 — the end-2024 level is computed here as 255 − 93. Usage is Table 13’s; cover is computed here as stocks ÷ (usage ÷ 52). SHFE stocks are not printed in the documents checked; the IEA’s remark is on p.150 of the Global Critical Minerals Outlook 2026.

At the country level the market is one great asymmetry. Indonesia mines 2.6 Mt, refines 1.7 Mt and exports most of it — $22.1 bn more of nickel products than it imported in 2024 — while China mines 120 kt, refines 1.2 Mt and imported $24.5 bn more than it exported, as ore, NPI, matte and MHP. No agency publishes nickel use by country, so Table 15 sets mine output, refined output and net trade side by side.

Table 15. Mine output, refined output and net trade, major nickel countries

Country Mine output, 2025e Refined output, 2025 Net trade, 2024 Position
Indonesia 2,600 kt Ni 1,681 kt Ni +$22.10 bn Net exporter of processed nickel
Russia 1 200 kt Ni 123 kt Ni +$2.36 bn Net exporter of metal and matte
Canada 140 kt Ni 125 kt Ni +$2.29 bn Net exporter of metal and matte
Philippines 270 kt Ni n/p +$1.39 bn Ore exporter
New Caledonia 1 140 kt Ni n/p +$1.32 bn Ore and ferronickel exporter
Brazil 70 kt Ni 64 kt Ni +$0.68 bn Ferronickel exporter
Norway — 100 kt Ni −$0.40 bn Refines imported matte, exports metal
United States 10 kt Ni n/p −$1.25 bn Net importer of metal
Japan — 108 kt Ni −$2.62 bn Refines imported matte and MHP
China 120 kt Ni 1,160 kt Ni −$24.48 bn Net importer of ore and intermediates

Notes to Table 15

  1. Russia and New Caledonia report no trade to UN Comtrade; their net trade is built from their partners’ reports (mirror data) and is probably understated.
  2. n/p = not published: the IEA includes these countries in its “Rest of world” refining row.

Source: mine output from USGS MCS 2026 (Table 10); refined output from IEA, Global Critical Minerals Outlook 2026, Annex, “Nickel supply”, Refining, Historical 2025, p.354; net trade from UN Comtrade (public API, annual 2024, partner = World), exports less imports summed over HS 2604, 7501, 7502, 720260 and 283324, values in US dollars (exports FOB, imports CIF), computed here. The position column is this guide’s reading of the three.

Figure 10. Net trade in nickel products, 2024 ($ bn)

Indonesia+22.10
Russia (mirror)+2.36
Canada+2.29
Zimbabwe+1.46
Philippines+1.39
New Caledonia (mirror)+1.32
Finland+0.73
Brazil+0.68
Colombia+0.53
South Korea−0.58
Germany−0.67
France−0.70
Italy−0.77
Taiwan−0.89
India−0.98
United States−1.25
Japan−2.62
China−24.48
net importer (−) net exporter (+)
$ bn, 2024 · HS 2604 + 7501 + 7502 + 720260 + 283324 · exports − imports

Figure data: Table 15 and the same UN Comtrade query — every country whose net position was at least $0.5 bn either way among the 26 traders checked (Norway, at −0.40, is in Table 15 but below the cut); the extra rows are Zimbabwe +1.46, Finland +0.73, Colombia +0.53, South Korea −0.58, Germany −0.67, France −0.70, Italy −0.77, Taiwan −0.89 and India −0.98.

2.5 Supply structure: products & recycling

How nickel reaches the market matters as much as how much there is. The defining fact: most primary nickel is now class 2 product, not refined metal. Nickel pig iron alone carried about 2 Mt of nickel in 2025 — about 55% of world primary production on Eramet’s count — and Vale puts class 2 products at 56% of the global market. Add the intermediates and a large majority of the world’s new nickel never becomes LME-deliverable metal: it flows straight from furnace to stainless mill, or from autoclave to battery-chemical plant. That is why the LME price alone can mislead, and why the product spreads in Section 1.3 carry real information.

Nickel is the main product of its mines, but it rarely travels alone. The sulfide mines earn by-product credits — revenue from copper, cobalt and platinum-group metals netted against the cost of producing nickel; Glencore’s Sudbury and Raglan mines also produced 9.4 kt of copper and 91,000 ounces of palladium in 2025. Laterite HPAL plants co-produce cobalt: the Huayue plant made 8,023 t of cobalt alongside its 85 kt of nickel, which makes Indonesian MHP one of the world’s main cobalt sources (the cobalt guide follows that thread). Those credits pull reported nickel costs down and tie part of the cost curve to other markets.

Recycling is the third pillar. Nickel is fully recyclable, and stainless-steel scrap carries its nickel with it: the INSG counts about 972 kt of nickel in the stainless scrap melted in 2023, against 3,193 kt of primary use — so scrap supplied at least 23% of the nickel units entering use. In the United States, which has had no primary nickel refinery since 1985, scrap supplied about 60% of apparent consumption in 2025. Scrap is the price-elastic part of supply — collection rises when prices are high. Battery recycling is small today but is the forward story, as the first large fleets of electric cars retire in the 2030s.

Table 16. Nickel supply structure

Supply source Volume Share Trend Price elasticity 1
Primary nickel, 2025 3,660 kt Ni 100% — —
of which nickel pig iron (class 2) ~2,000 kt Ni ~55% Rising with Indonesian RKEF capacity Low — set by policy and capacity
of which other primary (ferronickel, class 1 metal, oxide, sulphate) ~1,660 kt Ni ~45% Class 1 flat; sulphate rising Medium
Nickel units entering use, 2023 4,165 kt Ni 100% — —
primary nickel 3,193 kt Ni 76.7% Rising Low
nickel in stainless-steel scrap 972 kt Ni 23.3% Rising with the scrap pool High — collection follows price

Notes to Table 16

  1. The trend and elasticity columns are this guide’s judgement, from the sources’ commentary.
  2. Eramet’s world finished production (3,660 kt) and the INSG’s primary production (3,880 kt, Table 13) are different counts; the NPI share is taken on Eramet’s own total. Other primary is computed as the residual.
  3. Only stainless-steel scrap is counted; nickel scrap used in alloys is not, so the scrap share is a floor. Primary use is the INSG’s September 2024 figure (the Factbook’s vintage); on the April 2026 revision (3,265 kt) the scrap share is 22.9%.

Source: Eramet Universal Registration Document 2025, Primary nickel producers (“A total of around” 2 million metric tons of NPI nickel content; “The proportion of NPI in the global production of primary nickel rose to” 55%) and “PRODUCTION OF FINISHED PRODUCTS” table, “WORLDWIDE TOTAL” 3,660.1; INSG, World Nickel Factbook 2024, Nickel Usage (“nearly 972,000 tonnes of nickel contained in” stainless scrap, 2023), p.26, with primary use from the INSG’s September 2024 release; class 2 share from the Vale 2025 Form 20-F, Competition (“Much of the world nickel production is composed of Class II nickel products”, 56%); by-products from the Glencore Annual Report 2025 (INO “Copper metal kt” 9.4, “Palladium koz” 91) and the Nickel Industries Annual Report 2025 (HNC “8,023 tonnes of cobalt”, p.8); US scrap and refinery from USGS MCS 2026, Recycling and Events, pp.132–133. Shares and residuals are computed here.

2.6 Trade flows & the road through Indonesia

Nickel’s trade map has been redrawn twice in a decade, both times by Indonesian law. Before 2014 Indonesia shipped raw laterite ore to Chinese NPI furnaces; the ore-export bans made the furnaces move to the ore, and Indonesia now exports processed products — NPI, matte, MHP, metal and sulphate. In 2024 it shipped $22.6 bn of nickel products, 49% of world exports by value, and the single flow from Indonesia to China — $19.8 bn as China reported it — was 42% of the world’s nickel imports. The Philippines kept the raw-ore trade, and in 2025 Indonesia itself imported almost 300 kt of nickel in Philippine ore for its HPAL plants. Class 1 metal and matte from Canada, Russia, Norway and Finland flow to Western users and to Japan’s and Norway’s refineries — a flow redrawn in 2024 by a ban on Russian nickel.

Table 17. Largest nickel exporters, 2024

Rank Exporter Exports Share of world Main products
1 Indonesia $22.57 bn 49.1% NPI and ferronickel ($14.06 bn), matte and MHP ($7.12 bn)
2 Canada $2.88 bn 6.3% Unwrought metal ($1.77 bn), matte ($0.95 bn)
3 Russia 1 $2.36 bn 5.1% Unwrought metal ($1.19 bn), matte ($0.85 bn)
4 China $2.18 bn 4.7% Unwrought metal ($2.07 bn)
5 Finland $1.72 bn 3.7% Matte ($0.67 bn), metal ($0.64 bn), concentrate ($0.41 bn)
6 Norway $1.61 bn 3.5% Unwrought metal ($1.61 bn)
7 Zimbabwe 2 $1.46 bn 3.2% Matte ($0.99 bn), concentrate ($0.47 bn)
8 Philippines $1.42 bn 3.1% Ore ($1.04 bn), MHP ($0.38 bn)
— World $45.95 bn 100% —

Source: UN Comtrade, public API, annual 2024, exports by reporter, HS 2604 + 7501 + 7502 + 720260 + 283324, summed here; notes and full source under Table 18.

Table 18. Largest nickel importers, 2024

Rank Importer Imports Share of world Main products
1 China $26.66 bn 56.5% NPI and ferronickel ($13.90 bn), matte and MHP ($7.61 bn), ore ($2.67 bn)
2 Japan $3.05 bn 6.5% Matte and MHP ($1.85 bn), metal ($0.89 bn)
3 Norway $2.01 bn 4.3% Matte ($2.00 bn)
4 United States $1.77 bn 3.7% Unwrought metal ($1.54 bn)
5 South Korea $1.19 bn 2.5% Metal ($0.48 bn), ferronickel ($0.32 bn)
6 Taiwan $1.12 bn 2.4% Metal ($0.88 bn)
7 Germany $1.03 bn 2.2% Metal ($0.96 bn)
8 India $1.01 bn 2.1% Metal ($0.60 bn), ferronickel ($0.38 bn)
— World $47.14 bn 100% —

Notes to Tables 17 and 18

  1. Russia (and New Caledonia, ninth with $1.32 bn) reports nothing to UN Comtrade; its exports are its partners’ reported imports from it (mirror data), and the world export total includes $3.68 bn of such mirror values.
  2. Zimbabwe’s matte is largely platinum-group-metal matte, whose value includes those metals; values throughout include co-product metal in ores, mattes and MHP.
  3. “Main products” are the largest HS codes: ore 2604, matte and MHP 7501, unwrought metal 7502, NPI and ferronickel 720260, sulphate 283324.

Source: UN Comtrade, public API, annual 2024, HS 2604, 7501, 7502, 720260 and 283324, partner = World, reporter-side values (primaryValue; exports FOB, imports CIF), summed over the five codes here; the Indonesia–China flow is China’s reported imports from Indonesia (reporterCode=156). Shares are computed here; world exports and imports differ because exporters and importers value and time trade differently. Philippine ore to Indonesia is the IEA’s (Global Critical Minerals Outlook 2026, p.149); the Russian ban is the USGS’s (MCS 2025, Events, Trends, and Issues).

There is no Hormuz in nickel — no single sea lane whose closure would cut supply. The chokepoint is a processing stage and a policy regime. Indonesia refined 45% of the world’s nickel in 2025 and China 31%; China makes 75% of the world’s nickel sulphate, and Indonesia’s own sulphate output is only 10%. Every product in Table 19 runs through one of the two. The rules that govern those plants are the vulnerability: Indonesia’s ore quotas, floor prices and export rules; the Philippines’ proposed ban on raw-ore exports from 2030; and, for HPAL, the sulphur that leaching consumes — about 9 tonnes per tonne of nickel, so an 80% rise in the sulphur price adds about $1.7 per kilogram of nickel to HPAL costs.

Table 19. Nickel trade by product, 2024

Product · HS code World exports Largest exporter · share Largest importer · share
NPI and ferronickel (720260) $16.35 bn Indonesia (86.0%) China (86.9%)
Unwrought nickel (7502) $12.58 bn China (16.4%) China (13.9%)
Matte, MHP and other intermediates (7501) $11.71 bn Indonesia (60.9%) China (58.2%)
Ores and concentrates (2604) $3.97 bn Philippines (26.3%) China (61.1%)
Nickel sulphate (283324) $1.34 bn Indonesia (39.3%) China (55.0%)

Source: UN Comtrade, as Tables 17–18, by code; export totals include the Russian and New Caledonian mirror values; import shares are of each code’s world imports. HS 720260 carries both ferronickel and Indonesian and Chinese NPI, and its weights are gross alloy; HS 2604 weights are wet ore. Chokepoint shares from IEA, Global Critical Minerals Outlook 2026 — refining, Annex “Nickel supply”, p.354 (shares computed here); sulphate, “accounting for 75% of production” and “Indonesia produces only 10% of global nickel sulphate”, p.151; sulphur, “Requiring approximately 9 tonnes of sulphur per tonne of contained nickel”, p.150; the Philippine proposal, p.39.

Figure 11. Where nickel travels: major exporters and importers, 2024 ($ bn)

Exporters2024 · $ bn
Importers2024 · $ bn
  • Indonesia22.57
  • Canada2.88
  • Russia (mirror)2.36
  • Philippines1.42
  • New Caledonia (mirror)1.32
  • China26.66
  • Japan3.05
  • Norway2.01
  • United States1.77
  • Finland0.99

Figure data: Tables 17–18 and the importers’ reports by partner in the same UN Comtrade query (China, Japan, Norway, the United States and every reporter’s imports from Russia); links below $0.3 bn are not drawn. The importers shown are those receiving a drawn link: South Korea, Taiwan, Germany and India import more than Finland in total (Table 18) but show no link of that size from the five exporters in the partner reports pulled, and none were pulled for Taiwan, Germany or India.

Current situation (not part of the structural analysis). Maritime disruption around the Strait of Hormuz since March 2026 doubled sulphuric-acid prices between February and April 2026, and China halted sulphuric-acid exports from May 2026, raising costs for Indonesian HPAL plants (IEA Global Critical Minerals Outlook 2026, p.53). The episode is unresolved; it shows the input chokepoint, not a settled outcome.

2.7 Market organisations & coordination

Nickel has no cartel — no body sets output quotas across countries — but it has something the other base metals lack: a single government whose industrial policy is supply policy. Indonesia controls the marginal tonne and manages it actively: annual RKAB mining-work-plan quotas (introduced in 2023 as three-year allocations, cut back to one year in October 2025 and set significantly lower for 2026); the HPM ore floor price, raised in April 2026; royalty changes; revocations in September 2025 for non-compliance with rehabilitation or production requirements; and the processing mandates behind the export ban. China is the other half of the system: Chinese groups own or feed most Indonesian plants, and China refines 31% of the world’s nickel and makes 75% of its sulphate.

The formal institutions are softer. The International Nickel Study Group (INSG), based in Lisbon, is the intergovernmental body that publishes the authoritative production, usage and balance statistics, but it sets no quotas — and its members are Australia, Brazil, Cuba, the European Union, Finland, France, Germany, India, Italy, Japan, Norway, Portugal, Russia, Sweden and the United Kingdom, without Indonesia, China or the Philippines. The Nickel Institute is the industry’s association and a permanent observer to the INSG. The LME and SHFE set the rules of price discovery, a role the 2022 squeeze showed is anything but neutral. Western governments treat nickel as a critical mineral: the US added it to its list in 2022, and US policy has ranged from a Defense Production Act grant for a domestic processing plant (2024) to an April 2025 executive order promoting seabed minerals.

Table 20. Who shapes the nickel market

Body Role Leverage 1 Source
Government of Indonesia RKAB quotas, HPM ore floor, royalties, export ban, permits The de facto swing producer Filed | IEA GCMO 2026 | Outlook for nickel | “introduced in 2023 as three-year allocations” | p.148
Chinese processors and the Chinese state Own or feed most Indonesian plants; refine 31%, make 75% of sulphate Set the marginal cost and the feed demand Filed | IEA GCMO 2026 | Outlook for nickel | “accounting for 75% of production” | p.151
Government of the Philippines Mine permits; proposed raw-ore export ban from 2030 The second ore source Filed | IEA GCMO 2026 | Market review | “Proposed ban on raw mineral exports to start in 2030” | p.39
INSG (15 members, listed in the text) Intergovernmental statistics and studies Data, not quotas Filed | INSG Member Countries | “Current membership comprises”
Nickel Institute Industry association; INSG observer Demand development, standards Filed | INSG Member Countries | “Organizations that have permanent observer status with the INSG include the”
LME and SHFE Exchanges, warehousing, price limits The reference prices Filed | USGS MCS 2024 | Events | “permanent daily price limits”
US and EU governments Critical-mineral lists, sanctions, procurement rules Who may sell to whom Filed | USGS MCS 2023 | Events | “a U.S. critical minerals list was published”

Notes to Table 20

  1. The leverage column is this guide’s judgement.

Source: IEA, Global Critical Minerals Outlook 2026, Outlook for nickel — RKAB (“introduced in 2023 as three-year allocations”, revised October 2025), p.148; permit revocations, 2026 output curbs and the April 2026 HPM revision, p.149; sulphate share, p.151; the Philippine proposal, p.39; the 2026 quota (“set at a significantly lower level than in 2025”) from the INSG’s April 2026 press release; INSG members and observers from the INSG’s Member Countries page; the US critical-minerals list and 2025 measures from USGS MCS 2023, MCS 2025 and MCS 2026, Events, Trends, and Issues.

Concentration is the measure that matters, and it is rising. In 2021 Indonesia and China refined 61% of the world’s nickel; in 2025, 76%. Indonesia alone went from 907 kt to 1,681 kt, while the rest of the world outside the seven largest refiners fell from 541 kt to 367 kt.

Table 21. Refined nickel output by country, 2021 and 2025, IEA

Country 2021 2025 Share, 2025
Indonesia 907 kt Ni 1,681 kt Ni 45.1%
China 746 kt Ni 1,160 kt Ni 31.1%
Canada 113 kt Ni 125 kt Ni 3.4%
Russia 121 kt Ni 123 kt Ni 3.3%
Japan 128 kt Ni 108 kt Ni 2.9%
Norway 91 kt Ni 100 kt Ni 2.7%
Brazil 61 kt Ni 64 kt Ni 1.7%
Rest of world 541 kt Ni 367 kt Ni 9.8%
World 2,709 kt Ni 3,729 kt Ni 100%

Notes to Table 21

  1. The IEA’s refining covers nickel “processed into a metal, oxide, nickel pig iron, ferronickel, or sulphate” and excludes intermediates; its world total (3,729 kt) differs from the INSG’s primary production (3,880 kt, Table 13) and Eramet’s finished production (3,660 kt, Table 16). The IEA’s mining count for 2025 is 4,207 kt, against the USGS’s 3,900 kt.

Source: IEA, Global Critical Minerals Outlook 2026, Annex, “Nickel supply”, Refining, Historical 2021 and 2025, and note, p.354. Shares are computed here.

Figure 12. Refined nickel output by country, 2025 (kt Ni)

Indonesia
China
Canada
Russia
Japan
Norway
Brazil
Rest of world
1,681
1,160
125
123
108
100
64
367
Refined nickel output, 2025 (kt Ni; IEA)

Figure data: Table 21.

3. The companies & the value chain

3.1 The largest nickel companies

The corporate league table looks nothing like it did a decade ago. The largest producer is almost certainly Tsingshan Holding Group — the privately held Chinese stainless maker that built the Indonesian RKEF model, partners Eramet at Weda Bay and Nickel Industries at Morowali, and which Eramet calls the leading player in NPI — but it publishes no production figures, and neither does China’s state-owned Jinchuan Group. Among the companies that do report, Vale, through Vale Base Metals, made 177 kt of finished nickel in 2025 from Sudbury, Voisey’s Bay, Thompson, Onça Puma and Indonesian ore, 70% of it class 1. The new generation is Indonesian: Harita Nickel sold 228 kt of nickel from Obi Island in 2024, and Nickel Industries’ RKEF lines made 125 kt in 2025; PT Vale Indonesia, which Indonesia’s state miner MIND ID now controls with Vale and Sumitomo, made 72 kt in matte. The Western diversified miners are shrinking their nickel books: Glencore produced 72 kt, Anglo American agreed to sell its Brazilian ferronickel business to MMG, South32 agreed to sell Cerro Matoso, and BHP put its Western Australian nickel division into temporary suspension in December 2024, to be reviewed by February 2027. Russia’s Nornickel, historically the largest class 1 producer, is listed for completeness, but its 2025 reports could not be retrieved. As throughout this guide, companies are sized on production and reserves, never market value; you can screen every listed nickel producer by production, resources and cost on Metal Pilot’s nickel mining stock screener.

Table 22. Largest nickel producers by output and reserves

Company Country Type Listing Nickel output, latest year Nickel reserves Reserve life Source
Harita Nickel Indonesia Indonesian RKEF + HPAL Public (IDX: NCKL) 228.4 kt Ni, sold, 2024 1 n/p — Filed | NCKL AR 2024 | Operational performance | “total sales volume of FeNi reached”
Vale (Vale Base Metals) Brazil Diversified; sulfide + laterite Public (NYSE:VALE) 177.2 kt Ni, finished, 2025 2 ~5.36 Mt Ni, attributable n/c Filed | Vale 20-F 2025 | Item 4, Production | “Total” | p.64
Derived | reserves 377.5 Mt × 1.42% 3
Nickel Industries Australia Indonesian RKEF + HPAL stake Public (ASX:NIC) 125.0 kt Ni in NPI (100% of RKEF) + 8.5 kt Ni in MHP (10% of HNC), 2025 n/p (resources only) — Filed | NIC AR 2025 | Review of Operations | “Total nickel production”; “Attributable HNC production (10%)" | pp.6, 8
PT Vale Indonesia Indonesia Indonesian RKEF to matte Public (IDX: INCO) 4 72.0 kt Ni in matte, 2025 n/p — Filed | INCO AR 2025 | Operational performance | “nickel in matte production in 2025 reached”
Glencore Switzerland Diversified; sulfide + HPAL Public (LSE:GLEN) 71.9 kt Ni, own-sourced, 2025 ~1.81 Mt Ni, 100% 25 yrs Filed | Glencore AR 2025 | Nickel assets | “Total Nickel department”
Derived | INO 31.0 Mt × 2.02% + Murrin Murrin 118 Mt × 1.00% 5
Sumitomo Metal Mining Japan Refiner with HPAL stakes Public (TSE: 5713) 66.2 kt Ni, electrolytic nickel, FY to Mar 2026 n/p — Filed | SMM FY2025 results | Output by major product | “Electrolytic nickel” | p.6
Anglo American United Kingdom Diversified; ferronickel (being sold) Public (LSE:AAL) 39.7 kt Ni in ferronickel, 2025 0.675 Mt Ni, 100% 17 yrs Filed | Anglo American IAR 2025 | Nickel | “Production volume (t)"; Ore Reserves | “Barro Alto Saprolite (incl. stockpile)", “Niquelândia Saprolite”
South32 Australia Diversified; ferronickel (being sold) Public (ASX:S32) 37.1 kt Ni payable, FY to Jun 2025 ~0.26 Mt Ni, 100% 7 yrs Filed | South32 AR 2025 | Cerro Matoso | “Payable nickel production (kt)"
Derived | Ore Reserves, laterite and stockpile, tonnes × grade
Eramet France Indonesian ore + NPI (joint venture) Public (Euronext Paris: ERA) 35.8 kt Ni in NPI, Weda Bay plant, 100%, 2025 7.97 Mt Ni, Weda Bay, 100% n/c Filed | Eramet URD 2025 | Operational metrics; §1.3.4 Ore Reserves | “GRAND TOTAL” 7,974 kt Ni
BHP Australia Diversified; nickel suspended Public (ASX:BHP) 30, kt Ni FY to Jun 2025 6 n/p — Filed | BHP AR 2025 | Nickel | “to achieve production of” 30 kilotonnes
Sherritt International Canada HPAL miner-refiner (Moa, 50%) Public (TSX:S) 25.2 kt Ni finished, Moa 100%, 2025 1.08 Mt Ni, Moa 100% 43 yrs Filed | Sherritt AIF 2025 | Production results; Mineral reserves | “Total Proven and Probable Reserves” 1083.8 kt
Nornickel Russia Sulfide major, class 1 + PGMs Public (MOEX: GMKN) n/d 7 n/d — —
Tsingshan Holding Group China Integrated NPI + stainless Privately held n/p n/p — Filed | Eramet URD 2025 | Class 2 producers | “is the leading player in this market”
Jinchuan Group China State miner-refiner State-owned 8 n/p n/p — Filed | Vale 20-F 2025 | Competition (named among the largest integrated suppliers)

Notes to Table 22

  1. Harita’s 2025 annual report could not be retrieved; 228.4 kt is 2024 sales of nickel in ferronickel (126.3 kt) and in MHP and sulphate (102.1 kt), consolidated.
  2. Includes 16.0 kt refined from feed bought from third parties; 70% class 1, 28% class 2 (Vale 20-F 2025, “In 2025, 70% of our nickel products were Class I”).
  3. Nickel Mineral Reserves at 31 December 2025, attributable (90% of Vale Base Metals; 30.5% of PT Vale Indonesia’s ore), so reserve life against 100%-basis production is not computed (n/c).
  4. PT Vale Indonesia’s largest shareholders are MIND ID (34.0%, Indonesian state), Vale (33.9%) and Sumitomo Metal Mining (11.5%).
  5. Glencore states reserves on a 100% asset basis; both mines are wholly owned, so reserve life is computed on the same basis.
  6. Including a drawdown of inventory. BHP’s Nickel West and West Musgrave moved into temporary suspension in December 2024 (“transitioned into temporary suspension at the end of the first half of FY2025”); BHP intends to review the decision by February 2027.
  7. n/d = not found: Nornickel’s site could not be reached to retrieve its 2025 results. Russia’s finished nickel output was 138.2 kt in 2025 on Eramet’s count (Eramet URD 2025, “PRODUCTION OF FINISHED PRODUCTS”).
  8. Owned by Gansu province; its Hong Kong-listed subsidiary (HKEX: 2362) publishes no group nickel output.

Source: the companies’ latest annual reports and filings, row by row as cited — Vale 2025 Form 20-F, Nickel Industries Annual Report 2025, PT Vale Indonesia Annual Report 2025 (IDX → Listed companies → INCO → Annual report), Glencore Annual Report 2025, Sumitomo Metal Mining, Consolidated Financial Results for the Year Ended March 31, 2026 (pages of the PDF), Anglo American Integrated Annual Report 2025, South32 Annual Report 2025 (2025 Annual Reporting Suite → Annual Report 2025), Eramet Universal Registration Document 2025, BHP Annual Report 2025, Sherritt Annual Information Form 2025 and Harita Nickel’s Annual Report 2024 (IDX → Listed companies → NCKL). Output and reserves are each company’s own basis, stated in the cell; the rows are not additive. Reserves marked ≈ are computed here as tonnes × grade from the reserve tables. Reserve life is computed here only where reserves and output share a basis (n/c = not computed). The type column is this guide’s classification. No market values are shown by design.

3.2 Company archetypes along the value chain

Explorers — mostly sulfide hunters in Canada, Australia and the United States — are options on discovery and on Western buyers paying for non-Chinese supply. Developers carry the sector’s scars: Western HPAL plants have a history of large overruns, while Chinese-Indonesian builders put up the same capacity faster and cheaper. Producers split starkly into Indonesian-cost operators — RKEF and HPAL at the bottom of the cost curve, with policy risk built in — and higher-cost producers whose survival depends on the price cycle or on a strategic parent. Diversified miners have been selling or idling their nickel; refiners and integrated groups earn conversion margins; royalty and streaming exposure barely exists in nickel. Among the developers, this blog analyses Canada Nickel and its Crawford project in Ontario.

Table 23. Nickel company archetypes

Archetype What they do Revenue model Examples Price sensitivity 1
Explorer Hunt sulfide and laterite deposits None (raise and spend) Junior explorers Very high
Developer Permit, finance and build mines and plants None until production Western sulfide and HPAL projects High, plus overrun risk
Indonesian-cost producer RKEF and HPAL at the bottom of the curve Nickel sales less low cost Nickel Industries, Harita Nickel, PT Vale Indonesia High, cushioned by margin
Higher-cost producer Western sulfide, HPAL and ferronickel Nickel sales less high cost Sherritt; BHP’s suspended Nickel West Extreme (survival leverage)
Diversified miner Nickel among other commodities Multi-commodity sales Vale, Glencore, Anglo American, South32 Medium (blended)
Refiner or integrated group Convert feed into metal, sulphate, stainless Conversion and product margins Sumitomo Metal Mining; Tsingshan (private) Low to medium

Notes to Table 23

  1. The price-sensitivity column is this guide’s judgement.

Source: this guide’s classification; the named examples and their operations are from Table 22 and the filings cited there — e.g. the Vale 2025 Form 20-F, the Nickel Industries Annual Report 2025 and the Sherritt AIF 2025.

3.3 Infrastructure & balance-sheet assets

A nickel company’s filings describe a chain of physical assets, and knowing which metric matters for each makes the accounts readable. The foundation is the reserve and resource base — tonnes of contained nickel at a stated grade, reported under JORC, NI 43-101 or S-K 1300. Mines are measured by ore moved and grade; Indonesian laterite mines are cheap earth-moving operations licensed in wet tonnes of ore, sulfide mines are conventional hard-rock. The heavy capital sits in the middle: RKEF lines (furnace capacity and power — the reason Indonesian parks run captive coal plants), HPAL autoclaves (capacity, uptime and acid consumption), smelters and refineries (capacity, recovery, LME brand status) and sulphate plants. Watch gross versus attributable throughout: Indonesian operations are joint ventures — Nickel Industries reports 100% of RKEF lines it owns 80% of, Eramet holds 38.7% of Weda Bay — and by-product credits can move a reported nickel cost from the top of the curve to the bottom.

Table 24. Nickel-company asset types and metrics

Asset type What it does Key metric Unit
Reserves and resources The in-ground nickel base Contained nickel; grade Mt Ni; % Ni
Laterite or sulfide mine Extract ore Ore moved; grade; quota Mt or wmt per year
RKEF line Smelt saprolite into NPI or ferronickel Furnace capacity; power cost kt Ni/yr; $/MWh
HPAL plant Leach limonite into MHP Capacity; acid and sulphur use kt Ni/yr; t sulphur per t Ni
Smelter and refinery Matte into class 1 metal Capacity; recovery; LME brand kt Ni/yr; %
Sulphate plant MHP, matte or metal into nickel sulphate Capacity kt Ni/yr
By-product streams Cobalt, copper, PGM revenue By-product credit $ per t Ni

Source: this guide’s summary of the asset disclosures in the filings cited under Table 22 (reserves under the JORC Code, NI 43-101 and S-K 1300), with the HPAL sulphur metric from the IEA Global Critical Minerals Outlook 2026, p.150.

4. Investing in nickel

4.1 Ways to own it — exposure vehicles

Physical nickel has no retail market, so the choice is between paper nickel and nickel businesses. Futures on the LME (6-tonne lots) or the SHFE are the direct instrument: leveraged, margined and — as March 2022 showed — exposed to the health of the exchange itself. Futures-based exchange-traded products wrap the same mechanism for retail buyers and inherit its structural flaw: the fund must roll each expiring contract into the next, and in contango — nickel’s normal state — every roll sells the cheaper near contract and buys the dearer far one, a recurring cost that makes the fund lag the spot price over time (in backwardation the roll is a tailwind). The canonical demonstration is oil’s 2020 super-contango, when crude-tracking funds fell far behind the spot price they were meant to follow (worked through in the oil guide); nickel’s contango is usually milder, but the drag is the same in kind. For long horizons the practical route is equities — Indonesian-cost producers for leverage with a margin cushion, diversified miners for a blended exposure, refiners for conversion margins, explorers and developers for Western-supply option value — or miner ETFs that bundle them. There is effectively no royalty or streaming route and no physically backed fund of consequence in nickel.

Table 25. Ways to own nickel

Vehicle What you actually own Tracks spot? Key structural cost or risk Best suited for
Futures (LME, SHFE) Exchange contracts in 6-tonne lots Yes, near term Leverage, margin calls, exchange risk (2022) Professionals, hedgers
Futures-based ETP A rolled futures position Poorly over time Contango roll drag Short-term tactical views
Indonesian-cost producers Low-cost RKEF and HPAL businesses No — amplifies Indonesian policy, joint-venture structures Leverage with a margin cushion
Higher-cost and pure-play producers Western nickel businesses No — amplifies Survival at Indonesian-set prices Cycle bets
Diversified miners Multi-commodity businesses Loosely Nickel often a small and shrinking line Core resources exposure
Explorers and developers Deposits and projects No Financing and overrun risk; binary outcomes Western-supply optionality
Miner ETFs A basket of the above Loosely Concentration in a few liquid names A diversified sector view

Source: this guide’s summary of vehicle structures — the futures terms from the LME nickel contract specifications and the Eramet Universal Registration Document 2025 (SHFE listing, p.67); structural attributes only, no fees or prices, which change.

4.2 How to value & screen nickel producers

Nickel screening starts where every mining screen starts — reserves, cost, mine life — but three nickel-specific lenses do the real sorting. First, position against the Indonesian cost floor, read in a producer’s unit cash cost — the operating cost per tonne, reported before by-product credits, after them (C1) or as an all-in cost that adds sustaining capital and overheads: the producers that published unit costs for 2025 ranged from $7,765 a tonne at the Huayue HPAL plant (before cobalt credits) to $13,140 at the Moa joint venture (after them), all below the 2025 average price of $15,162 — while BHP’s Nickel West and other Western Australian mines nearer the top of the curve closed or are heading into closure. A Western producer’s case must say why it survives at Indonesian-set prices: grade, by-products, premiums for low-carbon or non-Chinese metal, or a strategic owner. Second, product class: class 1 metal and battery-grade feed sell into the policy-favoured end of the market; NPI is chained to Chinese stainless margins. Third, by-product reliance: cobalt, copper and PGM credits flatter headline costs and import other markets’ cycles, so read every cost both before and after credits. For developers, capital cost per tonne of capacity against Chinese-Indonesian builds is the killer metric. These screens — resources, cost position, product — run across every listed nickel producer on Metal Pilot’s nickel mining stock screener.

Table 26. Nickel producer screening metrics

Metric What it tells you Good vs. concerning 1 Where to find it
Reserves and resources (Mt Ni, grade) Scale and longevity Larger and higher-grade is better Reserve statement
Unit cash cost ($/t Ni, before and after credits) Position on the cost curve Well below the multi-year average price (~$15,900 in 2016–2025) is robust; near it is stressed Annual report, MD&A
Product class and customer Which market you sell into Class 1 and battery feed favoured; NPI tied to stainless Company disclosures
By-product credit reliance Quality of the cost figure Modest reliance is more durable Cost notes, MD&A
Capital cost per tonne (developers) Build competitiveness Near Chinese-Indonesian builds; multiples above need a reason Feasibility studies
Jurisdiction and policy exposure Quota, royalty and sanction risk Diversified or protected positions Filings, country policy

Notes to Table 26

  1. The ranges are this guide’s judgement, anchored to the 2016–2025 average LME cash price of $15,862 (Table 3) and the costs in Table 27.

Source: this guide’s screening framework; the average price is computed here from the World Bank Pink Sheet, annual (Table 3), and the cost evidence is Table 27’s filings.

Table 27. Unit costs of nickel producers that publish one, 2025 or latest fiscal year

Producer or operation Output Unit cost As printed Cost basis 1 Source
Huayue HPAL (HNC), Indonesia 85.0 kt Ni $7,765/t Ni $7,765/t Ni Cash cost, before by-product credits Filed | NIC AR 2025 | HPAL operations | “Cash costs” | p.8
PT Vale Indonesia (Sorowako) 72.0 kt Ni $9,339/t Ni ~$9,339 per ton Cash cost of sales per unit of nickel matte Filed | INCO AR 2025 | Management discussion | “the cash cost of sales per unit of nickel matte”
Nickel Industries RKEF, Indonesia 125.0 kt Ni $10,042/t Ni $10,042/t Ni Cash cost Filed | NIC AR 2025 | RKEF operations | “Cash costs” | p.6
Cerro Matoso, Colombia 37.1 kt Ni $10,935/t Ni $4.96/lb Operating unit cost: revenue less EBITDA, per unit sold Filed | South32 AR 2025 | Cerro Matoso | “Operating unit cost (US$/lb)"
Barro Alto and Codemin, Brazil 39.7 kt Ni $11,244/t Ni 510 c/lb C1 cash cost Filed | Anglo American IAR 2025 | Nickel | “Unit cost (c/lb)(1)"
Vale Base Metals (all nickel) 177.2 kt Ni $12,158/t Ni $12,158 per ton All-in cost Filed | Vale AR 2025 | Performance highlights | “Nickel all-in cost ended 2025 at USD”
Moa joint venture, Cuba 25.2 kt Ni $13,140/t Ni $5.96/lb Net direct cash cost, after by-product credits Filed | Sherritt AIF 2025 | Production results | “Net direct cash cost”
Nova (IGO), Australia 16.4 kt Ni n/c A$5.53/lb Cash cost (payable), Australian dollars Filed | IGO AR 2025 | Nova | “Cash cost (payable)"

Notes to Table 27

  1. The bases are not comparable: Huayue’s excludes the cobalt credit (about $1,900 per tonne of nickel in 2025), Moa’s and the C1 figure include credits, Cerro Matoso’s includes royalties, Vale’s is an all-in cost that includes more than operating cash, and PT Vale Indonesia’s is per unit of an intermediate. Cerro Matoso and Nova are years to June 2025.
  2. Pounds are converted here at 2,204.62 lb per tonne; IGO’s Australian-dollar figure is not converted and is left out of Figure 13.

Source: the producers’ latest reports, row by row as cited — Nickel Industries Annual Report 2025, PT Vale Indonesia Annual Report 2025 (IDX → Listed companies → INCO → Annual report), South32 Annual Report 2025 (2025 Annual Reporting Suite → Annual Report 2025), Anglo American Integrated Annual Report 2025, Vale Annual Report 2025 (Investors → Results and reports → Annual Report 2025), Sherritt AIF 2025 and the IGO Annual Report 2025. Output is each producer’s basis from Tables 5 and 22.

Figure 13. Cost curve of seven nickel producers, 2025 ($/t Ni)

Unit cost ($ thousand/t Ni)
20
15
10
5
0
7.8
9.3
10.0
10.9
11.2
12.2
13.1
0
20
40
60
80
100
Cumulative output of the seven (%)

Figure data: Table 27, seven producers ranked by unit cost, bar widths their share of the seven’s 561 kt; the dashed line is the 2025 average LME cash price, $15,162 (Table 3). The bases differ (Table 27, note 1), so the curve ranks the published figures rather than a common cost.

4.3 Macro regimes, rates & correlations

Nickel is a pro-cyclical industrial metal — directionally it behaves like copper, with more violence and one extra gear: supply policy. (For how the major commodities compare across the same regimes, see the macro regime guide.) Demand rides industrial production and, through stainless, Chinese construction and investment; since about 2020 the battery cycle adds a second driver. Being priced in dollars, nickel tends to gain when the dollar weakens; being non-yielding and growth-geared, it suffers when tightening chokes activity — interest rates work through growth and the dollar, not through any hoarding channel. But nickel’s biggest moves have been supply stories — the 2007 boom against slow supply, the 2014 ban, the 2023–25 Indonesian flood — so a regime reading alone underdiagnoses this metal.

Table 28. Nickel across economic regimes

Regime Typical nickel performance 1 Why Example, annual averages
Global expansion, early cycle Strong Stainless and industrial restocking 2003 +42%; 2006 +65%; 2007 +54%
China stimulus Strong Stainless demand is China-centred 2010 +49%, after 2009’s −31%
Falling dollar, reflation Strong Dollar-priced and growth-geared 2021: broad dollar −3.9%, nickel +34%
Supply-restriction shock Spikes Bans, quotas, squeezes 2014 ban year +12%; March 2022 monthly average $33,924
Recession, growth scare Weak Demand destruction 2008: nickel −43%, S&P 500 −17%; 2009 −31%
Strong dollar into a slowdown Weak Dollar and demand headwinds together 2015: broad dollar +13.1%, nickel −30%
Own supply wave (any macro) Weak Indonesian capacity outruns demand 2023–25: −17%, −22%, −10% while the S&P 500 rose 5%, 27%, 15%

Notes to Table 28

  1. The performance column is this guide’s judgement; every example is a calendar-year change in the annual average, computed here.

Source: nickel from Table 3 (World Bank, LME cash); the broad US dollar index from FRED, series DTWEXBGS, annual means of daily values; the S&P 500 from CNBC’s daily closes (.SPX), annual means; changes computed here. Regime results are historical, not predictive.

On past performance, nickel rewards cycle timing, not patience. The annual average rose 76% from 2000 to 2025 while US consumer prices rose 87% — a small real loss of about 6% over 25 years — after a 74% fall from the 2007 annual peak to the 2016 trough and a near-tripling into 2022. It is also the most volatile of the six LME base metals: monthly changes from 2000 to 2025 had an annualised volatility of 29%, against 21% for copper and 17% for aluminium. The monthly average fell 81% from May 2007 to December 2008. Past performance is not indicative of future results.

The equity amplifier. The 2022–2025 bust is the concluded case study. The monthly average nickel price fell 57% from March 2022 to November 2025, and the annual average 41% from 2022 to 2025. The producers’ shares fell further at the extremes: PT Vale Indonesia fell 78% from its April 2022 closing high to its April 2025 low, Nickel Industries 74% from March 2022 to April 2025, and IGO — whose Nova nickel mine is heading into closure while lithium, its other metal, also collapsed — 81% from November 2022. On annual averages the gap was smaller — PT Vale Indonesia −44% and Nickel Industries −36% from 2022 to 2025 against the metal’s −41% — because low-cost producers kept their margins: operating leverage amplifies the extremes, and the cost position decides how much of it survives.

On correlations, monthly changes in the nickel price from 2006 to 2025 moved most with copper (+0.59) — the same industrial engine — and with the S&P 500 (+0.39) and Brent crude (+0.37), and against the US dollar (−0.44); the link to gold (+0.29) is weak. Every relationship weakened in the second decade (copper +0.50, the S&P 500 +0.20, the dollar −0.24 in 2016–2025), as Indonesian supply shocks drove the price on their own. All are sample-dependent and can break down in crises.

Table 29. Nickel correlations, monthly, 2006–2025

Asset Correlation, 2006–⁠2025 2006–⁠2015 2016–⁠2025 Note
Copper +0.59 +0.63 +0.50 Shared industrial cycle
S&P 500 +0.39 +0.52 +0.20 Risk-on metal
Brent crude +0.37 +0.47 +0.25 Growth-geared; energy is a cost input
Gold +0.29 +0.26 +0.34 No haven behaviour
US consumer prices +0.27 +0.33 +0.17 Weak inflation link
US dollar (broad index) −0.44 −0.57 −0.24 Dollar-priced

Source: computed here — Pearson correlation of monthly log changes in monthly averages, February 2006 to December 2025 (239 observations; 237 for US consumer prices, which were not published for October 2025). Nickel, copper, gold and Brent from the World Bank Pink Sheet, monthly (sheet “Monthly Prices”); the dollar from FRED DTWEXBGS and US CPI from FRED CPIAUCSL; the S&P 500 from CNBC daily closes (.SPX). The window starts in 2006 because the broad dollar index does. The volatility comparison in Section 4.3 uses the same monthly file (columns “Nickel”, “Copper”, “Aluminum”, “Zinc”, “Lead”, “Tin”), annualised standard deviation of monthly log changes, January 2000 to December 2025, computed here (nickel 29.0%, lead 23.1%, zinc 22.4%, tin 22.1%, copper 21.3%, aluminium 17.0%). The note column is this guide’s reading. Correlations are historical and time-varying.

Figure 14. Nickel’s correlations with major assets, monthly, 2006–2025

Copper
+0.59
S&P 500
+0.39
Brent crude
+0.37
Gold
+0.29
US CPI
+0.27
US dollar (broad)
−0.44

Figure data: Table 29, 2006–2025 column.

Equity data for the amplifier episode: CNBC daily closes, split-adjusted — PT Vale Indonesia (INCO), Nickel Industries (NIC), IGO — used for percentage price moves only (not total returns); nickel from the World Bank monthly series; the moves are computed here. Nova’s transition into closure is from IGO’s Annual Report 2025.

4.4 Price drivers & cycles

Nickel’s price is set by a short list of forces, best read through concluded episodes. On the demand side: global and Chinese industrial growth (through stainless), the battery cycle and its chemistry mix, and the dollar. On the supply side the list is unusually policy-heavy: Indonesian output and export rules, Chinese processing capacity, the slow response of conventional mines, and — a nickel speciality — failures of market structure. Demand builds gradually, supply arrives in floods, and the price overshoots both ways.

Figure 15. Seven episodes that shaped the nickel market, 2006–2025

  1. 2006
    Stainless boom, 2006–07The annual average rises 65% in 2006 and 54% in 2007; the monthly average peaks at $52,179/t in May 2007.
  2. 2008
    The crashThe 2008 average falls 43% and the monthly average reaches $9,686/t in December, 81% below the peak.
  3. 2014
    Indonesia bans ore exportsThe 2014 ban on direct-shipping ore pushes Chinese and Indonesian groups to build smelters in Indonesia.
  4. 2016
    The 2015–16 bustThe monthly average falls to $8,299/t in February 2016, a 13-year low; LME stocks pass 370,000 t by December.
  5. 2020
    The ban returnsIndonesia reinstates its ore-export ban in January 2020, two years earlier than announced.
  6. 2022
    The LME squeezeIn March the price rises 270% and LME nickel trading is disrupted for about two weeks.
  7. 2023
    Indonesia's supply wave, 2023–25Indonesian NPI, matte and MHP outrun demand; the annual average falls 41% from 2022 to $15,162/t in 2025.

Chart source: annual and monthly averages from the World Bank Pink Sheet (Table 3); the 2014 ban, the 2016 low and LME stocks from USGS MCS 2017; the 2020 reinstatement from MCS 2020; the 2022 disruption from MCS 2023 and the LME’s independent review as reported in MCS 2024 (“a 270% increase in nickel price and subsequent suspension of nickel trading”), Events, Trends, and Issues.

The settled case studies teach four lessons. The 2006–08 boom and crash showed nickel’s supply inelasticity: Chinese stainless demand met slow mine supply, and the crash that followed proved the economics of making stainless feed from laterite. The 2014 ore ban was the first lesson in Indonesian policy power, which made the real supply shift after 2020 easy to underestimate. The March 2022 squeeze was a market-structure failure: the LME’s independent review found large, exposed short positions, opaque over-the-counter trades, thin liquidity and the use of LME prices to hedge class 2 nickel that cannot be delivered; the exchange answered with permanent daily price limits and over-the-counter position reporting. And the 2023–25 Indonesian wave showed that in nickel the bottom of the cost curve sets the ceiling on the price: surplus every year, prices down 41%, and Western mines closed.

Table 30. Nickel price drivers

Driver Direction of effect Why What to watch
Global and Chinese industrial growth Faster growth, higher nickel Stainless is ~65% of use China stainless output, PMIs
Battery demand and chemistry More nickel-rich cells, higher Batteries are ~16% of use EV sales; LFP versus NMC share
Indonesian supply policy Restriction, spike; expansion, slump 67% of mine supply RKAB quotas, HPM, royalties
Chinese processing and stainless margins Overcapacity, lower Sets the marginal cost NPI price, stainless margins
US dollar Weaker dollar, higher nickel Dollar-priced (−0.44 correlation) Broad dollar index
Inventories and market structure Low stocks, spike-prone Thin class 1 buffer (3.7 weeks) LME stocks; exchange rules

Source: this guide’s summary; the shares are Tables 6 and 10 (INSG World Nickel Factbook 2024; USGS MCS 2026), the correlation Table 29 and the cover Table 14. The direction column is judgement grounded in the episodes of Figure 15.

4.5 Risks, controversies & ESG

The bear case and the bull case share a root: concentration. Policy risk cuts both ways — the government that flooded the market is now restricting it, and every investment case in the sector is, knowingly or not, a bet on Jakarta’s choices. China exposure compounds it: Chinese groups own or feed most Indonesian processing, so Western tariffs, sanctions or subsidy rules can redraw who may sell to whom — the 2024 ban on Russian nickel showed how fast. Substitution is live: LFP cells took share from nickel-rich chemistries in 2025, and stainless mills can turn to lower-nickel grades or scrap when prices run. Input risk is newer: HPAL depends on sulphur and sulphuric acid, whose prices jumped in early 2026 (the labelled aside in Section 2.6). Market-structure risk was demonstrated in 2022, and cyclical risk needs no argument after 2008 and 2023.

The ESG ledger is heavy and contested. Indonesian nickel is built on coal: the IEA lists access to low-cost coal-based energy among Indonesia’s structural advantages, which makes RKEF nickel among the most carbon-intensive in the industry — although the IEA also measures nickel’s emissions intensity falling in 2024 and 2025 as producers decarbonise. Laterite mining clears land, and HPAL leaves acid-leach residues to manage. The Philippines suspended half of its mines in 2016 for failing to meet environmental standards and in 2025 announced a 50-year ban on new mining permits in Palawan; New Caledonia’s 2024 unrest cut its output by about half. Set against this, nickel is essential to the energy transition and fully recyclable, and buyers increasingly ask for low-carbon, traceable class 1 nickel — the strategic hope of the Canadian, Nordic and Australian producers. These are contested questions, and reasonable analysts weigh them differently.

Figure 16. Nickel risk map — likelihood vs. impact

Impact
High
Low
Indonesian policy shift
China stainless slowdown
LFP substitution
Sulphur & energy costs
Western trade rules
ESG & carbon footprint
Exchange failure
Global recession
Low
High
Likelihood

Chart source: this guide’s qualitative assessment of the risks in Section 4.5; positions are judgement, not measurements.

Source for Section 4.5: IEA, Global Critical Minerals Outlook 2026 — coal-based energy, p.148; emissions intensity (“Emissions intensity for nickel continued the reduction trend observed in 2024”), p.106; sulphur, pp.53, 150; LFP, p.71; USGS, Mineral Commodity Summaries: Nickel, Events, Trends, and Issues — 2017 (Philippine suspensions), 2025 (New Caledonia, −52%; the Russian ban) and 2026 (Palawan).

5. Future outlook & forecasts

Nickel’s forward story is a tug-of-war between a demand base the energy transition should grow by roughly two-thirds by 2040 and a supply machine that has, so far, grown faster. Forecasts are scenarios, not measured facts — they hinge on electric-vehicle adoption, battery chemistry and, above all, Indonesian policy — but the agencies agree on the shape.

5.1 Demand

The IEA’s Stated Policies Scenario (STEPS) — its projection of the policies governments have actually adopted — takes total nickel demand from 3.53 Mt in 2025 to 4.46 Mt in 2030 and 5.83 Mt in 2040, with clean-energy uses rising from 18% of demand to 41%; by 2035, it expects batteries to take 30% of nickel use and almost two-thirds of the growth. Its range is wide: 5.36 Mt in 2040 under current policies, 6.52 Mt in its High Demand Scenario. The near term is slower: the INSG forecasts usage growing about 4% to 3.75 Mt in 2026, with stainless steel expanding and nickel’s role in batteries growing “more gradually than anticipated” as LFP chemistries and plug-in hybrids take share. China, Indonesia, Japan and Korea account for most of the incremental demand.

5.2 Supply and the balance

The supply side is the outlook’s controlling variable. On announced projects the IEA’s base case lifts mined supply from 4.21 Mt in 2025 to 5.10 Mt in 2030, keeping the market in surplus before 2030, with Indonesia providing more than all of the growth in mining and its share heading toward 75% by 2035 — concentration getting worse, not better. Then the pipeline thins: by 2040 base-case mined supply slips to 4.86 Mt and the IEA sees a 1.9 Mt gap against primary supply requirements emerging, which a high-production case closes by more than 60% — mostly with more Indonesian supply. The near-term wildcard is Indonesian policy itself: the 2026 quota cut is why the INSG’s April 2026 forecast turned to a 32 kt deficit, and the IEA notes that higher ore floor prices and sulphur costs are squeezing HPAL economics. Battery-grade supply is the most concentrated part: China is expected to remain the dominant sulphate producer, with 70% of the market in 2035.

Table 31. Nickel demand and supply outlook, scenario figures

Indicator — source · scenario 2025 2026f 2030 2040
Primary production — INSG 3,880 kt Ni 3,715 kt Ni — —
Primary usage — INSG 3,596 kt Ni 3,747 kt Ni — —
Implied balance — INSG +283 kt Ni −32 kt Ni — —
Total demand — IEA, Stated Policies 3,532 kt Ni — 4,464 kt Ni 5,832 kt Ni
Total demand — IEA, Current Policies 3,532 kt Ni — 4,331 kt Ni 5,361 kt Ni
Total demand — IEA, High Demand 3,532 kt Ni — 4,799 kt Ni 6,523 kt Ni
Mined supply — IEA, base case 4,207 kt Ni — 5,098 kt Ni 4,858 kt Ni

Notes to Table 31

  1. Bases differ and the rows are not netted: the INSG counts primary production and usage; the IEA’s demand is total demand, including nickel met by recycling, and its supply is mined output from existing and announced projects. The IEA compares mined supply with primary supply requirements (demand net of secondary supply), which it charts but does not tabulate.

Source: INSG, April 2026 press release, Nickel Market Observations for 2026; IEA, Global Critical Minerals Outlook 2026, Annex, “Nickel demand” (“Total demand”, “Share of clean energy”), p.353, and “Nickel supply”, Mining, base case, p.354; the 2035 shares, the 2040 gap and the sulphate share from the Outlook for nickel, pp.153–154, and HPAL economics, p.150. Projections, not measured data.

Figure 17. Nickel demand vs. mined supply in the IEA’s outlook (kt Ni)

Nickel (kt Ni)
6,000
5,000
4,000
3,000
2,000
1,000
0
3,532
4,207
4,464
5,098
5,832
4,858
2025
2030
2040
Year
Demand (STEPS) Mined supply (base case)

Figure data: Table 31, IEA rows — demand in the Stated Policies Scenario against mined supply in the base case; the two are on different bases (Table 31, note 1).

5.3 Catalysts to watch

The near-term watch-list is dominated by one capital: Jakarta. RKAB quota approvals and amendments, the HPM ore floor and royalty rates are the fastest-moving price drivers. The INSG’s April and October meetings — the next in the week of 12 October 2026 — and the USGS’s February summaries mark the data calendar. Watch LME stocks (the surplus made visible), Chinese stainless output and NPI prices (the demand pulse), electric-vehicle sales and the LFP share (the battery story), and Western capacity decisions — BHP’s review of Nickel West by February 2027 and the sales of Anglo American’s and South32’s ferronickel operations. What would confirm the bear case: continued Indonesian expansion into a soft stainless cycle. What would break it: a lasting Indonesian supply-management turn, a battery-demand reacceleration toward nickel-rich chemistries, or a policy shock to Indonesian-Chinese supply.

Table 32. Nickel catalyst calendar

Catalyst or theme Timing Why it matters Watch this metric
Indonesian RKAB quotas, HPM and royalties Annual, with amendments 67% of mine supply Quota tonnage (wmt); HPM
INSG meetings and forecasts April and October The balance outlook Production, usage, balance
USGS Mineral Commodity Summaries Annual (February) Mine supply and reserves Indonesia’s share
IEA Global Critical Minerals Outlook Annual (May) Long-run demand and supply Battery share; supply gap
LME stocks Daily The surplus made visible Weeks of cover
EV sales and battery chemistry Monthly Battery demand LFP versus nickel-rich share
Western capacity decisions 2026–2027 Cost-curve and supply-security test BHP’s Nickel West review; ferronickel sales
Philippine ore-export policy Proposed for 2030 Feed for Indonesian HPAL Legislation

Source: INSG April 2026 press release (Dates of Next Meetings); the USGS and IEA publication calendars; the BHP review from its Annual Report 2025; the ferronickel sales from the Anglo American and South32 reports cited under Table 22; the Philippine proposal from the IEA Global Critical Minerals Outlook 2026, p.39. The why and metric columns are this guide’s summary.

6. Summary

Nickel is the alloying metal of the industrial world — the reason stainless steel does not rust — and the energy-dense heart of nickel-rich batteries. Physically it is two markets in one: high-purity class 1 metal priced on the LME, and the far larger flow of class 2 and intermediate products — NPI, ferronickel, matte, MHP — that moves from furnace to mill or battery plant at negotiated prices; nickel pig iron alone was about 55% of primary output in 2025. Its price is best read as an average, and the averages tell a brutal cycle: $8,638 a tonne in 2000, $37,230 in 2007, $9,595 in 2016, $25,834 in 2022 and $15,162 in 2025. It is mined two-thirds in Indonesia (2.6 of 3.9 Mt in 2025), refined three-quarters in Indonesia and China, and used 63% in China (2023); about two-thirds of all primary nickel becomes stainless steel, with batteries the second pillar at about 16%. The balance ran four straight surpluses, 283 kt in 2025, refilling LME stocks to 255 kt — and Indonesia’s 2026 quota cut turned the INSG’s forecast to a small deficit. Supply is otherwise structured by product and policy, not by a strait: Indonesia’s processing, China’s refining and sulphate, and the export rules of both archipelagos are the chokepoints. Coordination is informal but real: Indonesian quotas and floor prices are the market’s de facto OPEC, while the INSG — without Indonesia or China as members — supplies the statistics. The companies split into the unreported giants (Tsingshan, Jinchuan), the diversified majors (Vale, Glencore) shrinking or selling their nickel, the Indonesian-cost producers (Harita, Nickel Industries, PT Vale Indonesia) and the casualties (BHP’s suspended Nickel West) — compared on production, reserves and cost, never market value. The regime profile is pro-cyclical and dollar-sensitive like copper’s, repeatedly overridden by supply policy; the equities amplified the 2022–25 bust at its extremes, and the lesson of those years is that the bottom of the cost curve sets the ceiling on the price. The variable to watch is Indonesian supply policy, with the battery chemistry mix close behind.

To go from this big-picture view to the actual companies — screening every nickel producer by production, resources and cost position — explore Metal Pilot’s nickel mining stock screener.

Terms in this post (43)
Austenitic (300-series) stainless
Nickel-bearing stainless grades. Nickel’s core demand.
Brent
The North Sea crude benchmark that prices most of the world’s internationally traded oil. In depth: Oil market guide — Pricing & benchmarks
By-product credit
Revenue from secondary metals netted against the cost of the primary metal. Large credits lower a mine’s reported unit cost but tie it to other metals’ prices.
Care and maintenance
An asset idled but kept ready to restart, usually until prices recover. Holding it still costs money, and a restart takes time and capital.
Cash cost / C1 / all-in cost
Direct operating cost per tonne / C1 after by-product credits / including sustaining and overhead costs. Who survives at Indonesian-set prices.
Class 1 nickel
Refined metal of at least 99.80% nickel (cathode, briquettes, pellets, rounds). LME-deliverable; usable for batteries and alloys.
Class 2 nickel
Lower-purity, iron-bearing NPI and ferronickel. Most of world supply; the stainless feed.
Contango / backwardation
The slope of a futures curve: contango when later-dated contracts cost more than nearer ones, backwardation when they cost less. Backwardation usually signals a tight market.
Conventional / unconventional
Here: the traditional sulfide-to-refinery route versus the newer laterite-to-NPI or HPAL routes. The newer routes now set the marginal cost.
EV (enterprise value)
Market capitalisation plus net debt, or less net cash, and any other claims ahead of shareholders: what the market values the whole business at.
Ferronickel
An iron-nickel alloy for stainless steel, made from saprolite. Traditional stainless feed (Cerro Matoso, Barro Alto).
Flotation
A froth process that separates sulphide minerals from crushed ore into a concentrate, using air bubbles and reagents.
FOB / CIF
Free on board (value at the exporter’s port) / cost, insurance and freight (value delivered). Why export and import values of the same trade differ.
HPAL
High-pressure acid leaching — dissolving nickel laterite ore in acid in autoclaves to recover nickel and cobalt. It is capital-intensive and hard to run.
HPM
Indonesia’s monthly floor price for nickel ore. Sets the domestic ore cost.
JORC / NI 43-101 / S-K 1300
The Australian, Canadian and US SEC codes for reporting mineral resources and reserves; an estimate under them is signed by a qualified or competent person.
Laterite ore
Shallow ore formed by tropical weathering (Indonesia, Philippines, New Caledonia). About four-fifths of mine output; cheap to mine, energy-hungry to process.
LFP
Lithium iron phosphate — a battery cathode that uses no nickel or cobalt. It is cheaper and safer but stores less energy than nickel-rich cathodes.
Limonite / saprolite
The upper, lower-grade and cobalt-bearing layer / the deeper, higher-grade layer of a laterite. Decide the route: HPAL for limonite, RKEF for saprolite.
Magmatic sulfide ore
Higher-grade ore formed from nickel-rich magma (Norilsk, Sudbury, Voisey’s Bay). The conventional route to class 1 metal; carries copper, cobalt and PGM by-products.
Matte
A smelted nickel sulfide intermediate. Bridges NPI and sulfide ore to class 1 metal and sulphate.
MHP
Mixed hydroxide precipitate — a nickel-cobalt intermediate made by HPAL plants and sold to refiners.
Mirror data
Trade figures for a country built from its partners’ reports of trade with it, used where its own data are missing or unreliable.
Nickel sulphate
A battery-grade nickel salt, at least 22% nickel. What cathode makers buy; 75% made in China.
NMC / NCA
Nickel-rich lithium-ion cathodes — nickel manganese cobalt and nickel cobalt aluminium. They store more energy than LFP and drive battery demand for nickel.
NPI (nickel pig iron)
A cheap iron-nickel alloy, about 8–12% nickel, made in RKEF furnaces. About 55% of primary output; the product that remade the market.
Operating leverage
Profits that move more than revenue because costs are largely fixed, which makes a producer’s earnings swing harder than the commodity price.
Payability
The share of the metal contained in a concentrate or intermediate that the buyer pays for, as a percentage of the benchmark price.
Production
The metal, oil or gas the company produced in the period at its own share of each mine or field — ounces, pounds or tonnes, or barrels of oil equivalent a day — before or after royalties as it reports; for a royalty or stream holder, its share of the operators’ output. In depth: The Oil & Gas Value Chain: Upstream — Units & reading a production number
Reserve life
Years the reserves last at the current or guided production rate: reserves divided by a year’s output, on one reserve category. In depth: The Oil & Gas Value Chain: Upstream — How to read & screen a producer
Reserves
What a company can show it will produce at a profit from known deposits or fields, at stated prices and costs, estimated under a disclosure code — NI 43-101, JORC or S-K 1300 for mines; SEC rules or NI 51-101 for oil and gas. In depth: The Oil & Gas Value Chain: Upstream — Reserves vs resources
Reserves vs. resources
Reserves are the economically mineable part of an estimate; resources are the broader geological estimate of what is in the ground.
RKAB
Indonesia’s mining work-plan approval, which sets each mine’s ore quota. The market’s de facto supply lever.
RKEF
Rotary-kiln electric furnace, smelting saprolite into NPI or ferronickel. Low-capital, coal-powered; Indonesia’s workhorse.
Roll yield
The gain or loss from replacing an expiring futures contract with a later one — negative in contango, positive in backwardation.
Royalty
A share of a mine’s or well’s revenue or profit paid to a government or a royalty holder, ahead of the operator’s own margin. In depth: The Oil & Gas Value Chain: Upstream — Fiscal regimes
SHFE
The Shanghai Futures Exchange, China’s metals market; it reports its warehouse stocks each Friday. In depth: Copper market guide — Pricing & benchmarks
Short squeeze
Forced buying by short sellers that drives a price spike. March 2022: a 270% rise and two weeks of disrupted trading.
Stated Policies Scenario
The International Energy Agency’s outlook scenario built on the policies governments have actually adopted or announced.
Stream
An upfront payment for the right to buy a share of a mine’s future metal at a fixed, low price: the operator gets capital now, the stream holder metal later. In depth: Silver market guide — Company archetypes along the value chain
Unit cash cost
The cash cost of producing one unit, on the basis the company reports: a miner’s C1 or cash cost per ounce or pound, an oil and gas producer’s operating cost per barrel of oil equivalent (boe) or per mcfe — with transport, production taxes and overhead where the company counts them. Lower is better. In depth: The Oil & Gas Value Chain: Upstream — What a barrel costs
Unit cost
The cost to produce one unit of output — an ounce, a pound, a barrel — on the basis the company reports, named in the cell. Lower is better.
Wet metric tonne (wmt)
A tonne of ore including its moisture. The unit of Indonesian quotas and ore prices.

7. Sources, methodology & disclaimer

7.1 Sources, methodology & data vintage

Methodology. Data as of 10 October 2026; the guide is refreshed annually, after the USGS Mineral Commodity Summaries (February), the INSG’s April meeting and the IEA’s Global Critical Minerals Outlook (May). Market structure is for full-year 2025; trade is for 2024, the latest year with every large trader reporting; company figures are each company’s latest fiscal year, which ends on 30 June 2025 for South32 and IGO and on 31 March 2026 for Sumitomo Metal Mining. Prices are calendar-year and multi-year averages of the LME cash price as the World Bank compiles it, never spot quotes; the trailing-twelve-month average is computed from the World Bank’s monthly series. Three production counts are kept apart: the USGS for mine output by country, reserves and the 2015–2025 mine series; the INSG for primary production, usage and the balance; and the IEA for refining by country, demand by use and the outlook. Each USGS and INSG year takes its latest available revision (USGS mine output from the edition two years later, except the 2025 estimate from MCS 2026; INSG figures from the latest release printing the year). Pounds are converted at 2,204.62 per tonne. Correlations use monthly log changes, 2006–2025; equity episodes use daily closes and their annual means. Every derived figure is computed in scripts kept with this guide’s evidence. Judgement columns are labelled. Reserves, resources and forecasts are estimates, not measured facts.

Data gaps & substitutions.

  • Consumption by country. No agency publishes it; Table 8 uses the INSG’s continental shares with the countries that have public figures (China, the United States), and Table 15 sets mine output, refined output and net trade side by side instead.
  • Source conflicts. World mine output in 2025 is 3.90 Mt on the USGS’s count, 4.17 Mt on the INSG’s (as printed by Eramet) and 4.21 Mt on the IEA’s; primary output is 3.88 Mt (INSG), 3.73 Mt refined (IEA) and 3.66 Mt finished (Eramet). The 2025 surplus is 283 kt on the INSG’s count and 200 kt on the IEA’s refined basis; the USGS reprints earlier INSG vintages for 2022–2024. The guide uses each source for the tables named above and never mixes them in one row.
  • Inventories. Only LME stocks are printed in the documents checked; SHFE and off-exchange NPI and intermediate stocks are not, so cover is understated.
  • First use. The INSG prints only the stainless and battery shares for 2023; the rest is one residual (Table 6).
  • Trade codes. HS 720260 carries both ferronickel and NPI; HS 7501 carries PGM-bearing matte as well as nickel matte and MHP; Russia and New Caledonia report no trade and appear through mirror data.
  • Companies and mines. Bases differ — nickel in product, finished nickel by ore source, own-sourced, payable, sold; 100% or attributable; calendar or June or March years. Tsingshan and Jinchuan publish no figures; Nornickel’s site could not be reached; Harita’s 2025 report could not be retrieved, so its 2024 sales are used; Weda Bay’s nickel in ore is not printed.
  • Costs. Seven producers publish a unit cost on differing bases (Table 27, note 1); the curve ranks the published figures, not a common cost.
  • Sources outside the hierarchy. Equity prices are CNBC’s split-adjusted daily closes, used for percentage moves only (not total returns), because no free primary price history can be downloaded. The LME’s contract page refuses scripted download; it is saved as a browser text capture.

Refresh log.

  • 10 Oct 2026 — full refresh. Moved every series to the newest editions (USGS MCS 2026 with each year’s latest revision, the INSG’s April 2026 release, the IEA Global Critical Minerals Outlook 2026, UN Comtrade 2024, the producers’ latest reports) and replaced the price series with the World Bank’s LME cash averages. Corrected the balance series to the INSG’s latest revisions (2023–2025 surpluses now 175, 116 and 283 kt, against 170, 179 and 209 kt in the previous edition, and a 2026 forecast deficit in place of a surplus). Replaced approximate and aggregator-sourced figures with agency and company data: first use, regional use, refining, trade, operations, companies, unit costs, inventories, computed correlations and equity moves. Added the trade, net-position, refining and cost tables; dropped the judgement-based archetype chart; pinned every figure to its document and rebuilt every chart as a component. The same day’s pre-launch gate then corrected Australia’s JORC reserve figure, the 2016 price low, the Weda Bay ore measure and the S&P 500 change for 2023, widened the net-trade figure to every trader beyond $500 m, and repaired three source links.
  • 16 Aug 2026 — first published (data as of 6 July 2026).

The register below is the guide’s reference list: one band per document, in order of first use, each linked to the edition cited.

Table 33. Source register — the document behind every table and figure

Table / figure What it takes Locator Period
USGS, Mineral Commodity Summaries 2026: Nickel — page numbers are those of the full volume
Figure 1; Tables 4, 10, 11, 12, 15; Figures 7, 8 Mine production by country and world; reserves; resources by deposit type World Mine Production and Reserves; World Resources, p.133 2024, 2025e
Tables 1, 3, 8, 16; Sections 1.2, 2.4 LME cash price in $/t and $/lb; US primary consumption; scrap share; INSG surpluses Salient Statistics; Recycling; Events, Trends, and Issues, p.132 2021–2025
Tables 10, 20; Section 4.5 Country commentary; seabed order; Palawan ban; last US refinery Events, Trends, and Issues, pp.132–133 2025
IEA, Global Critical Minerals Outlook 2026
Figure 1 note 1; Tables 15, 19, 21; Figures 12; Section 2.6 Mined and refined nickel by country Annex, “Nickel supply”, p.354 2021, 2025
Table 7; Tables 31; Figure 17 Demand by use and scenario; mined supply, base case Annex, “Nickel demand”, p.353; “Nickel supply”, p.354 2021–2050
Figure 2; Tables 1, 2, 13, 14, 19, 20, 24; Sections 1.3, 2.5–2.7, 4.5, 5, 8.1 Processing routes and grades; sulphate specification and share; HPM; RKAB; sulphur; Philippine ore; 2026 price rise; outlook shares Outlook for nickel, pp.148–154; p.39 2023–2040
Sections 2.2, 2.6, 4.5 LFP price gap; sulphuric-acid disruption; emissions intensity pp.53, 71, 106 2024–2026
World Bank, Commodity Price Data (Pink Sheet), annual and monthly
Figure 1; Tables 3, 26, 28; Figures 3, 13, 15; Sections 1.3, 4.3 Nickel (LME cash) annual and monthly averages Sheets “Annual Prices (Nominal)” and “Monthly Prices”, column “Nickel” 2000–Sep 2026
Table 29; Figure 14; Section 4.3 Copper, gold and Brent monthly averages; six base metals for the volatility comparison Sheet “Monthly Prices” 2000–2025
INSG, The World Nickel Factbook 2024
Figure 1; Tables 6, 8, 16; Figures 5, 6 Use by sector; use by region and China’s share; nickel in stainless scrap Nickel Usage, pp.26, 28, 29, 31, 32 2001–2023
INSG, press releases — April 2017, April 2018, October 2018, October 2019, April 2021, April 2022, April 2023, April 2024, September 2024, April 2026
Figure 1; Tables 9, 13, 31; Figure 9 World primary production and usage; balances; the 2026 forecast “World primary nickel production was”; “World primary nickel usage was”; “The implicit market balances are” 2015–2026f
Tables 8, 16, 20, 32; Sections 2.2, 5 2023 use at the Factbook’s vintage; 2026 quota; battery commentary; meeting dates September 2024 and April 2026 releases 2023–2026
LME, nickel contract specifications (Futures and Physical sections)
Tables 1, 2, 25, 33 Lot size, purity, quotation Contract specifications page Current
Nickel Industries, Annual Report 2025 — pages of the PDF
Tables 1, 5, 16, 22, 27; Figures 4, 13 RKEF and HNC output, grade, cash costs, cobalt, ownership Review of Operations, pp.6, 8 2024–2025
Eramet, Universal Registration Document 2025 (Investors → Annual report → 2025 URD)
Tables 2, 25; Section 1.3 SHFE listing; NPI assessment and average; HPM formula §1.2.2.2.4 Nickel price, pp.67–69 2025
Tables 5, 14, 16, 22; Figure 4 Weda Bay ore and NPI; ownership; reserves; LME stocks; NPI share; world finished production Operational metrics; §1.2.2.2; §1.3.4 2024–2026
USGS, Mineral Commodity Summaries: Nickel, earlier editions — 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Table 11; Figure 8 World, Indonesian and Philippine mine production, each year’s latest revision World Mine Production and Reserves 2015–2023
Table 3 note 1 LME cash annual averages “Price, average annual, London Metal Exchange (LME)” 2015–2024
Table 14; Figure 15; Tables 20, 28; Sections 2.3, 4.4, 4.5 2014 and 2020 ore bans; 2016 low and LME stocks; 2022 disruption and LME review; critical-minerals list; 2024 events Events, Trends, and Issues (2017, 2018, 2020, 2023, 2024, 2025 editions) 2014–2024
PT Vale Indonesia, Annual Report 2025 (IDX → Listed companies → INCO → Annual report)
Tables 5, 22, 27; Figures 4, 13 Nickel in matte; shareholders; cash cost of sales Operational performance; shareholders; management discussion 2025
Glencore, Annual Report 2025
Tables 1, 5, 16, 22; Figure 4 Own-sourced nickel by asset; by-products; ore reserves Production from own sources – Nickel assets; Mineral Resources and Ore Reserves 2025
Anglo American, Integrated Annual Report 2025 (Annual reporting → 2025)
Tables 5, 22, 27; Figures 4, 13 Ferronickel output; C1 unit cost; ore reserves; sale to MMG Discontinued operations – Nickel; Ore Reserves 2025
South32, Annual Report 2025 (2025 Annual Reporting Suite → Annual Report 2025)
Tables 5, 22, 27; Figures 4, 13 Cerro Matoso payable nickel, operating unit cost, reserves, divestment Cerro Matoso; Ore Reserves; Glossary FY to Jun 2025
Vale, 2025 Form 20-F
Tables 5, 16, 22; Figure 4 Finished nickel by ore source; class split; nickel reserves; competitors Item 4, Production, p.64; Competition; Nickel Mineral Reserves 2025
Sherritt International, Annual Information Form 2025
Tables 5, 22, 27; Figures 4, 13 Moa finished nickel, net direct cash cost, reserves 2025 Production results; Mineral reserves 2025
Harita Nickel, Annual Report 2024 (IDX → Listed companies → NCKL → Annual report)
Tables 5, 22 Ferronickel and HPAL nickel sales Operational performance 2024
UN Comtrade, public API — HS 2604, 7501, 7502, 720260, 283324
Tables 15, 17, 18, 19; Figures 10, 11; Section 2.6 Exports and imports by reporter and partner, values; mirror data for Russia and New Caledonia Annual, reporter-side, partner = World and by partner 2024
INSG, Member Countries
Table 20; Section 2.7 Members and permanent observers Member Countries page Current
Sumitomo Metal Mining, Consolidated Financial Results for the Year Ended March 31, 2026 — pages of the PDF
Table 22 Electrolytic nickel output Output by the Company’s major product, p.6 FY to Mar 2026
BHP, Annual Report 2025
Tables 22, 32; Section 3.1 Nickel West production, suspension and review 6.5 Nickel FY to Jun 2025
JORC Code
Tables 24, 33 Reserve and resource reporting standard — —
Vale, Annual Report 2025 (Investors → Results and reports → Annual Report 2025)
Table 27; Figure 13 Nickel all-in cost 1.1 Performance highlights 2025
IGO, Annual Report 2025 (ASX copy)
Table 27; Section 4.3 Nova nickel output and cash cost; transition to closure Nova Operation FY to Jun 2025
FRED, DTWEXBGS — broad US dollar index and CPIAUCSL — US CPI-U
Tables 28, 29; Figure 14; Section 4.3 Dollar and CPI, monthly and annual means Series DTWEXBGS, CPIAUCSL 2000–2025
CNBC chart data — S&P 500, PT Vale Indonesia (INCO), Nickel Industries (NIC), IGO
Tables 28, 29; Figure 14; Section 4.3 Daily closes; monthly and annual means; peak-to-trough moves Daily bars, split-adjusted 2006–2025
This guide — derived, estimated or illustrative
Figure 1 (notes 2, 4, 7, 8) Market size, Indonesia’s share, scrap share, reserve life Computed from Tables 3, 10, 12, 13, 16 2023–2025
Figures 2, 16; Tables 23–26, 30 Value chain, archetypes, assets, vehicles, screening ranges, drivers, risk map This guide’s summaries and judgements —
Tables 1, 2, 4, 6, 10, 15, 16, 20, 22, 28, 29, 32 Magnitude, role, type, route, trend, position, elasticity, leverage, regime and note columns Judgement columns, labelled in each source line —
Tables 2, 4–19, 21, 22, 26, 27; Figures 4–13 Sums, shares, changes, residuals, reserve lives, cover, net trade, unit conversions, cost-curve widths Operations stated in each source line 2015–2025
Tables 28, 29; Figure 14; Section 4.3 Correlations, regime examples and amplifier moves Computed from the price and equity series above 2000–2025

Source: compiled from the source lines under each table and figure in this guide; each band links the edition cited.

7.2 Disclaimer & disclosure

This report is for informational purposes only and is not investment advice, a recommendation, or an offer to buy or sell any security or commodity. Nickel prices are exceptionally volatile, and the figures here are estimates as of the stated date that will change; reserves, resources, correlations and regime results are estimates and historical observations that may not persist. Do your own research and consult a licensed financial adviser before acting. This report was prepared with the assistance of AI; its figures were sourced from the documents in the register and reviewed, but readers should verify any number before relying on it. The author holds no position disclosed as a conflict in respect of the companies named.